I have a Gen 2 Tesla Wall Connector and I bought a NACS to J1772 adapter, initially I couldn't get it to work. I'd plug it in and the Wall Connector would light up a small section in the middle of the LED bar in RED.
To make a long story short, I did get it to work:
-- Wink
To make a long story short, I did get it to work:
- Turn ON the car, if it's OFF the car will try to charge immediately and the Wall Connector RED LED section will come on and no current will flow.
- Be sure to have the NACS to J1772 adapter attached to the cable
- Plug in the cable + adapter into the port, the Wall Connector will stay Green positioned at the top not current will be flowing
- Enter the car and turn the car OFF
- The car starts charging and the Wall Connector Green starts moving from top to bottom and current will be flowing
-- Wink