I thought I would share the video I made on doing it
https://youtu.be/qi49PO7pxIc?si=8FL...16taZsDERG9ONi55vmch7qhiu1COR2VetahOOm7NMcQMQ
https://youtu.be/qi49PO7pxIc?si=8FL...16taZsDERG9ONi55vmch7qhiu1COR2VetahOOm7NMcQMQ
-
Want to remove ads? Register an account and login to see fewer ads, and become a Supporting Member to remove almost all ads.
Swivel screen successfully retrofitted into my 2021 Tesla Model S Plaid
- Thread starter ShockYT
- Start date
Muzzman1
Active Member
Nice job, but Im VERY interested in the LED strips. Tell us about that!!
Edit, you mentioned in the Vid that it's aftermarket. (bummer)
Edit, you mentioned in the Vid that it's aftermarket. (bummer)
Daytonaviolet
Member
good job 
. I did the matrix headlights as well. Much brighter, 4 beams and cleaner Angel eyes. I’m doing the swivel screen next as soon as I get my car back. Question for the VCLeft. Does every plug goes back on the 03-b board ? Every plug which was on 02-b board goes on the 03-b board ?
. I did the matrix headlights as well. Much brighter, 4 beams and cleaner Angel eyes. I’m doing the swivel screen next as soon as I get my car back. Question for the VCLeft. Does every plug goes back on the 03-b board ? Every plug which was on 02-b board goes on the 03-b board ?Yes, externally it’s the same connectors. They just changed the internal electronics. Disconnect all the connectors, unbolt, slide the part up and out. Then reverse for the new part. Then do the programming/software redeploy/calibration routines.good job
View attachment 1015796
Daytonaviolet
Member
K.I.T.T.23
Member
Daytonaviolet
Member
Congrats, that’s a very cool upgrade.
I don’t like watching videos, so any chance you have a bill of materials for parts needed?
MikeChicago
Member
This is great. I can't help but wonder if I'm the only person who doesn't use this feature on my X and prefers the screen to be flat...
Daytonaviolet
Member
I have the swivel in my mxp but not in my msp. but when I sit in the mxp and watch videos, it’s a better view. Unless you watching videos, it’s not really needed. But it’s a good feature to have.
I dunno, after getting used to it tilted to the driver, flat just feels wrong.
Daytonaviolet
Member
Muzzman1
Active Member
My Plaid is flat and my wife's X is tilting. We leave her in flat too. Just never got around to tilting it on hers so that I would be pissed that mine doesn't tilt.
I have a video on the Plaid facebook group but maybe I should upload one of my channel
Daytonaviolet
Member
I could guide you through the process live and yes I can arrange the config to be changed but you will need a laptop and depending on the mcu in your model s you might need some extra connectors to connect to the mcu
Similar threads
