You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
On drive cannot be opened.Hi, could i prevent the trunk opening when the car is in drive?
I have the power trunk v4 with CAN bus (metal box)
The v6 firmware can be installed on my box?
Thanks
From the app i can open the trunk when the car is in D or NOn drive cannot be opened.
V6 with v4 hardware should be fine.
Because I have some issues with the trunk, Hansshow send me the v6
From the app I don't tried yet, but later (4 four hours after this message) I will try. But I don't see why should open it from app, when in drive, even N.From the app i can open the trunk when the car is in D or N
I tested that with my wife. I was sitting on the driver side with the car in D and my wife opened the trunk using the handle with the message procced with cautionJust checked and the trunk don't open in drive or neutral. On the screen show the message to "proceed with caution " and the animation of opening and closing the trunk.
In the same situation mine don't open even show the notificationI tested that with my wife. I was sitting on the driver side with the car in D and my wife opened the trunk using the handle with the message procced with caution
The canbus wire should be the issue. Cerca di portare il cavo dal portabagagli passandolo sotto il banchetto posteriore e fai la prova ( e lui che comunica con macchina) . Sarà dura passarlo sotto il tappeto ma non impossibile.Hi guys.
I installed today Hansshow power trunk v6. After 6 hours following this procedure, I found this thread about the 4 pin to be attached in the black box to make this thing work.
Now, I have 2 problems:
1) When the trunk is closing, the mechanism don't lock the trunk.. I have to manually press to close.
2) The app and the screen always show the trunk open and close sign... And when I leave the car, it doesn't lock automatically therefore. (I have to close manually via the app).
For this second problem I think I have to connect the canbus wire (I haven't connected it yet on purpose).
Can you please help me?
Thank you
You are Italian? Anche io!Th
The canbus wire should be the issue. Cerca di portare il cavo dal portabagagli passandolo sotto il banchetto posteriore e fai la prova ( e lui che comunica con macchina) . Sarà dura passarlo sotto il tappeto ma non impossibile.
Where is the fuse, thank you!Have you talked to them via the Whatsapp? I spoke to them yesterday asking about a missing buzzer and the box having no light and as you have posted its a newer update and buzzer built in and as you reported no indicator light.
My first thought is check the fuse and check the ground to make sure you getting good contact. Please keep following up with this post! I plan to install this weekend my self but now I'm worried
Same problem here.. Have you figured it out? Support terrible..@TM3Matt Are you still having issues with your trunk?
I had my V4 in for 3 months and now is not opening or closing at all. I can power cycle it and it'll work for a day then stop, power cycle again and it stops working after a short drive. Reached out to their support, let's see what they say.
An old thread I know but how can I go about power cycling it? I have power cycled the car but it didnt seem to fix my recent issue of the trunk no longer opening when pressing the outer button (after software version 2024.2.2.1) Can I power cycle the trunk control box seperately somehow?@TM3Matt Are you still having issues with your trunk?
I had my V4 in for 3 months and now is not opening or closing at all. I can power cycle it and it'll work for a day then stop, power cycle again and it stops working after a short drive. Reached out to their support, let's see what they say.
Couldn’t you just unplug the power cable from the ECU?An old thread I know but how can I go about power cycling it? I have power cycled the car but it didnt seem to fix my recent issue of the trunk no longer opening when pressing the outer button (after software version 2024.2.2.1) Can I power cycle the trunk control box seperately somehow?
I could if I knew where the ECU was. I bought this car second hand and got this issue after the latest update so I havnt installed this product myself. I was hoping there would be some simple way to "reboot" it for example but I guess I gotta start digging around in my trunk.Couldn’t you just unplug the power cable from the ECU?