I know Tesla sells a UMC2 10-30 adapter for use on a old style cloths dryer outlet. The wiring is two 120V hot wires and one neutral wire (which is tied to ground at the service panel). A 10-50 is wired the same as a 10-30 but typically has two 6AWG wires and one 8AWG wire for the neutral/gnd to handle the higher current. Several people have connected a 14-50P/cord to a Tesla wall charger which would be to hots and a ground. Has anyone attached either a 10-30P or 10-50P? i assume it would work? Thanks in advance for any assistance!