Email sended, thanks!!Just send an email request to [email protected] with your Apple ID (email address).
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Email sended, thanks!!Just send an email request to [email protected] with your Apple ID (email address).
Here is the current state of the Trip Computer custom screen. The gauge now displays both the instantaneous efficiency and the Trip average. To my surprise the Trip average matches very closely to the center display value after this short test drive. The value will jump around since TM-Spy only has access to the energy changes in 100 Wh steps.
View attachment 479435 View attachment 479436
@Turbo3 how we can create custom screens? you have template to see what can we do? I interested to read 96 cell voltage values in M3.Here is the current state of the Trip Computer custom screen. The gauge now displays both the instantaneous efficiency and the Trip average. To my surprise the Trip average matches very closely to the center display value after this short test drive. The value will jump around since TM-Spy only has access to the energy changes in 100 Wh steps.
View attachment 479435 View attachment 479436
wow, can be download cvs file?Here is the current state of the Trip Computer custom screen. The gauge now displays both the instantaneous efficiency and the Trip average. To my surprise the Trip average matches very closely to the center display value after this short test drive. The value will jump around since TM-Spy only has access to the energy changes in 100 Wh steps.
View attachment 479435 View attachment 479436
That message (0x401) is on a different CAN bus than the one we are currently monitoring.@Turbo3 A question:
If I want to get battery cell voltages in the Model 3, is that ok?:
Var Name v2.00,A,m,s,B,m,s,Min,Max,2's,Scale,Z,?,C,m,=,Msg id,D,m,s,E,m,s
PT:M3 cell 1:Volts:V,3,0xFF,0,4,0xFF,8,0,5,0,0.0001,0,0,1,0xFF,0x00,0x401,0,0,0,0,0,0
Where msgid are 0x401
byte 1: index (from 0x00 to 0x1F) 32 group of 3 cell values, then 0x00 are cell1, cell2 and cell3 voltage value
byte 2: status flag
bytes 3-4: cell voltage value 0.0001 factor
bytes 5-6: cell voltage value 0.0001 factor
bytes 7-8: cell voltage value 0.0001 factor
Yust add this 96 lines at botton of spyvarparmlist_.csv file?
Dear, are you sure working with Scan my tesla??, it seems scan my tesla can not connect trough wifi, only bluetooh and this amazon device seems not have bluettooh. Thanks for you help..Yeah that's correct. The default cable length is 1m so it's a bit difficult to stow the whole stuff inside the under cubby space. I was able to by putting the OBD2 transmitter into the deepest part of the space then carefully fold flat cables two times and stow them below.
You could order shorter cable but it didn't work in my case - he just sent me a 1m cable.
Another thing to note is that there is another app called Scan My Tesla and it requires Bluetooth adapter with traditional protocol - to your LELink can only speak BTLE protocol so it won't work with Scan My Tesla.
https://www.amazon.com/dp/B07D497PVF/
I'm using this adapter whose review doesn't seem to be great... this worked for both apps though. I purchased LELink 2 and it worked with TM-Spy perfectly but not Scan My Tesla. I also purchased OBDLink LX and though it worked with both apps, after a few days it stops to communicate and I had to take the cable out and power off-on to resume. So I don't recommend OBDLink LX for now.
I updated to 0.6.64.1 and could not find the trip custom screen when I went for a drive. Please let me know how I can find it.Version 0.6.64.1 is now available for testing.
- Added a Trip custom screen (only landscape). Auto starts when speed goes over 5 MPH. Press STOP at end of trip to save data to a csv file.
Good luck with your surgery!I have just managed to break my femur with surgery scheduled for tomorrow to put a nail in.
As a result it will be a while before I am out of the hospital and can add new testers or release any updates
I have just managed to break my femur with surgery scheduled for tomorrow to put a nail in.
As a result it will be a while before I am out of the hospital and can add new testers or release any updates
I have just managed to break my femur with surgery scheduled for tomorrow to put a nail in.
As a result it will be a while before I am out of the hospital and can add new testers or release any updates
I just tried TM-Spy for the first time. I purchased a Vgate iCar Pro Bluetooth 4.0 (BLE) OBDII Diagnostic dongle and ODB cable from a friendly TMC member. TM-Spy worked right away, just had to give it access to Bluetooth and it started showing the data. I was kinda worried about getting a cheap dongle, but so far no issues. The statistics section in the TM-Spy settings aways show 0 frames though.. I was hoping this would give me some indication about the dongle quality.
I see the following values:
DC Chrg Tot 1,011 kWh
AC Chrg Tot 8,014 kWh
Charge Tot 10,854 kWh
DC + AC does not add up to the total. Is that expected?
Currently I am able to use the Custom Screens (loaded all 6) and graphs. The manual also mentions a Battery Status screen. How do I get this?
Ah, that makes sense.It wont add up because you also have Regen charging
I'm getting 150 - 200 fps right now from inside the house. While in the car it's 250 - 300 fps.Also - I get 75-100 frames per second with the Carista dongle.