So the April 15th hold was not for the swivel screen reterofit as some had suggested unless they lied about mine being the first first vehicle to be released from that hold.
Here in the Munro Live video:
You can see the swivel casting. It has the upside down V track that a screw with a urethane bushing would fit into to force it along a specific track.
I pulled the closeout panel right below the screen out (super easy just pulls out by hand) and took a picture. As you can see, I have the same casting without the motors but I don't have the V track as seen in the Munroe video. Did they dispense with the track and just use the two motors to control each side in or out? They could have changed the design like this to make it simpler. It's also possible that the track is not all the way through and that it rides a bushing on the other side that can't be seen. I think I'll stick my worm camera up there and take a look.
Hopefully someone else who has the swivel can pull out the panel and take a photo to see if they also don't have the same through V channel that is shown in the Munroe video.
Half tempted just to remove the two screws, pull the entire panel out, and adjust the passenger side worm gear out so that it's permanently facing me.
View attachment 801008