You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Looks good! So that is +8 on the front and rear correct?I never took descriptive pictures with measurements, however I was expecting A LOT lower with the +8s on it, and I still drive around on low. Not sure if it made a huge difference but it's not slammed to the point of un-drivable
View attachment 543637
Got a pic of a side shot?I never took descriptive pictures with measurements, however I was expecting A LOT lower with the +8s on it, and I still drive around on low. Not sure if it made a huge difference but it's not slammed to the point of un-drivable
View attachment 543637
can anyone confirm or deny the 32.2 update affects the lowering links?
If anyone can print me out a set I’d gladly pay for it and shipping. Please pm me. Thank you.
Yes. Refreshed has the same length front and rear nowAny difference in Plaid height vs the older S models regarding these links.
Is there anyone still printing links, I found a website where someone is selling them “apguys” but his numbers seem to go past what scott(RIP) has suggested @ 62/82Thinking sets ranging from -2mm through to +8mm in 2mm increments should do most needs.
-2mm would raise the car (48mm ball centers front, 68mm ball centers rear)
0 difference, stock link replacements (50mm front and 70mm rear)
+2mm would lower the car (52/72 centers)
+4mm lower it more (54/74)
+6mm lower yet (56/76)
+8mm lowest (58/78) these would start to look dramatically lower, probably for show, not daily driving.
I would just get the Blox. I have them and they’re easy enough to work with. Added 7.5mm front and 9mm rear compared to the stock links to get this drop, which is in Low modeIs there anyone still printing links, I found a website where someone is selling them “apguys” but his numbers seem to go past what scott(RIP) has suggested @ 62/82
Any thoughts ?
I’ve also seen the adjustable ones but that seems like a hassle, but the price difference of $70 and $90 isn’t that much of a difference..
Of course they can. Question is will the print stand up to the elements and timeDoes anyone know of these links can be printed in ABS? That's what my friend has for his printer. Thanks.
Abs is one of the more durable filements.Of course they can. Question is will the print stand up to the elements and time
Of course they can. Question is will the print stand up to the elements and time
Abs is one of the more durable filements.