I received the Tesla cord to allow one to charge a Tesla on J1772 chargers that seem to the emerging standard for EV chargers. But I could not get the cord to charge. Does anyone know if there is a special sequence or trick to use the J1772 adapter? The local Nissan has two chargers on separate circuits and on both chargers I received a charger error 0x00000010000. (note I may be off a 0 or two in the middle) I tried to reduce amps down to 15 with no luck.
Or by chance is a firmware update needed to use the adapter?
The Nissan sales guy says the chargers have been successfully used by a Leaf and a Volt but I have my doubts as the one plug had a significant insect nest built in the plug that I first cleaned out with my pen knife.
Thank you
Or by chance is a firmware update needed to use the adapter?
The Nissan sales guy says the chargers have been successfully used by a Leaf and a Volt but I have my doubts as the one plug had a significant insect nest built in the plug that I first cleaned out with my pen knife.
Thank you
Last edited: