Ok guys. Picked up our MYLR white/white/19 today around noon at the Carlsbad location in San Diego. OD 1/14 and is an Austin build. Didn’t bother to ask SA when was exact build date but sticker on the door said 03/23 so I assume it’s probably not a reject. There were 9 miles on the odo. No matrix headlights.
SA was very accommodating and patient. Unlocked the car for us to inspect inside and out. Pick up experience overall was good. Lots of people at the SC just to ask questions about their cars lol.
Following is the list of things we have issues with on the car:
- front bumper lower plastic trim by the passenger side wheel well is scraped/scuffed/gouged
- passenger side headlight sits quite a bit higher than hood and fender
- hood gap is larger on driver side than passenger side
- driver side fender sticks out where it meets the front bumper
- clips on both sides of plastic cover inside frunk is unclipped/loose and other side tab has broken off
- rear window line has a high spot in the middle
- trunk gap is slightly bigger on driver side
- at least 6 paint imperfections that are spots under the clear coat
- driver side mirror does not adjust upwards and will fall when parked for some time
- boominess inside the cabin at higher speeds
- wind whistle coming from front windshield area
- passenger side carpet trim next to center console is popped out, loose and unclipped
- multiple black stains on white seats throughout the car
Despite all these things we still accepted delivery. I don’t know how long it would be for the next one to come and didn’t want to miss out on the tax credits. I know it may sounds pretty bad but I’m certain most of these things already have and or will be addressed and repaired by Tesla at some point. I also have no expectation for any domestic car maker to have good QC. For those of you still waiting, I hope you get a higher quality build than what I’ve got but also accept the fact that there is no perfect car. Hope you all the best.
View attachment 919300View attachment 919302