You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Did you reset it? I got the toolbox 3 but having issuesI’m having this same issue. From what I’ve found and understand you could clear your TAS Module with toolbox 3 subscription and a cable that plugs in under the main center screen or using a T can pro. I’ve been trying to find someone in the states T can pro to borrow/rent to clear mine, but no luck yet or someone who can help me get toolbox 2 downloaded as I have already paid for the Tesla toolbox subscription, but am unable to find toolbox 2.
Ideas on getting Tcan pro rented?I used T-can, the toolbox 3 didn't pass
Done, really appreciated.Did you try contacting Electrified Garage? They know a lot of people.
What do you mean by nothing you mean the red suspension light is on ? What are the service codes ?I still have my toolbox subscription active, but no matter combinations I do, I can make the car pass the Clear TAS Crash Test. Check all fuses, nothing. Maybe will need a new TAS and redeploy?? Looking for a T can Plus to see if have better luck. Thanks
Thank you, I will get Toolbox access again tomorrow and will try again, but until now this is what I have done.Are you in TAS service mode and unlocking the gateway ? you dont need tcan View attachment 836597
Thank you very much. OK. I got access again to Toolbox3 and follow the procedure. The procedure is more cumbersome than needed. Because it calls first to unlock the gateway using article 5582900, well in this article it calls to activate service mode prior to unlock the GTW. Great, I did it like that, then unlock GTW, as soon as you connect Toolbox 3, the Service mode changes to service mode plus. Meaning if you connect first the toolbox3 and then unlock GTW you will end with the same in just 2 steps. But, neither way, done several times let me to clear the Tas2 crash alert. I must have to go back and check the SRS? Maybe I still have an active crash.Are you in TAS service mode and unlocking the gateway ? you dont need tcan View attachment 836597
I don’t know who’s doing the layout on toolbox 3 it needs someone who actually works on cars do the layout ..the air suspension should be in a separate service page where the ride height and tas service mode should be together and they should Have a car displayed with icons for errors .. maybe they are planning on putting toolbox 3 on the iPhone app that would be the bestThank you very much. OK. I got access again to Toolbox3 and follow the procedure. The procedure is more cumbersome than needed. Because it calls first to unlock the gateway using article 5582900, well in this article it calls to activate service mode prior to unlock the GTW. Great, I did it like that, then unlock GTW, as soon as you connect Toolbox 3, the Service mode changes to service mode plus. Meaning if you connect first the toolbox3 and then unlock GTW you will end with the same in just 2 steps. But, neither way, done several times let me to clear the Tas2 crash alert. I must have to go back and check the SRS? Maybe I still have an active
I need to clear the TAS on a salvage mod X- I got a T can pro, but don’t see the connection to plug in to the MCU…. Do you have to disassemble the dash, or is there an easier way to do it? - or am I just a retard, looking in the wrong place?I used T-can, the toolbox 3 didn't pass
Toolbox 3 didn't help, I got Tcan pro and clear Tas at first try. sorry for the delayI don’t know who’s doing the layout on toolbox 3 it needs someone who actually works on cars do the layout ..the air suspension should be in a separate service page where the ride height and tas service mode should be together and they should Have a car displayed with icons for errors .. maybe they are planning on putting toolbox 3 on the iPhone app that would be the best
It can be cleared with 2022.36.2 in service modeToolbox 3 didn't help, I got Tcan pro and clear Tas at first try. sorry for the delay
Are you in TAS service mode and unlocking the gateway ? you dont need tcan View attachment 836597
Thank you very much. OK. I got access again to Toolbox3 and follow the procedure. The procedure is more cumbersome than needed. Because it calls first to unlock the gateway using article 5582900, well in this article it calls to activate service mode prior to unlock the GTW. Great, I did it like that, then unlock GTW, as soon as you connect Toolbox 3, the Service mode changes to service mode plus. Meaning if you connect first the toolbox3 and then unlock GTW you will end with the same in just 2 steps. But, neither way, done several times let me to clear the Tas2 crash alert. I must have to go back and check the SRS? Maybe I still have an active crash.
This is great details on vehicle gateway configuration! Could you please share the link to article 5582900?