Just got the quotes. The cost will be about $200 for a production run of 50 units. But first two test units have to be produced for me to test on my car, which is already set up for this. Basically the test will be plug and play — I just unplug my old unit, which is working fine, and plug in the test unit. The test is necessary to determine whether the new parts on the PCB function properly.
If and when the tests prove successful (likely 3-4 weeks) we’ll begin production of 50 units and take deposits (50% with an order, 50% when shipped). We will also need a volunteer to try installation on a Model S with autopilot (that so we can provide specific installation instructions for AP cars). I’ll provide the volunteer with a free PCB and remote, theirs to keep.