Order received, appreciate your business.I'll let you know. Just hit buy a couple minutes ago, what the heck, cant be worse than the crap on there now.
Koni's are going out today, tracking to follow shortly.
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Order received, appreciate your business.I'll let you know. Just hit buy a couple minutes ago, what the heck, cant be worse than the crap on there now.
FSD is something you can only use when conditions are right, A proper suspension setup is something that makes conditions right.Koni Red or FSD!
Looking forward to a review.Installed the Special actives on the rear of my 2020 MYLR. Will install the fronts next weekend.
So far, they seem to make a big difference smoothing out bumps.
Just to clarify, for install, you would recommend cutting the bump stops in half?I switched from:
• 2021 Model 3 Performance > 2022 Long Range > Koni Special Active (Suspension)
View attachment 1017170
• 20” Uberturbine with Michelin Pilot Sport 4S > 18” Aero V2 with Michelin Primacy MXM4 (Wheel/Tire)
View attachment 1017173
Results: Compression is slightly softer (~20%) while rebound is much faster (~50%) with significantly less body roll. Each wheel feels more balanced.
They’re currently being used with stock long range AWD springs. I would say for those hoping to get a comfortable ride to look elsewhere. Even with my abnormally over-dampened and mismatched stock shock absorbers these are only a mild-moderate improvement in ride quality/comfort despite being at stock ride height with more suspension traveling distance. If I had used 10mm lower performance springs I reckon it will be even less comfortable and require trimming the rubber stop.
Although it can be a great daily driver, the variability in comfort annoys me. Although it definitely reacts faster than stock, those with a keen eye will notice some sluggishness in the delayed onset of how the gas valves opens and closes and hence for very spirited driving or track use these will have you wanting more.
Based on my experience these won’t do comfort justice as compared to Mountain Pass Performance Comfort Coilovers or Unplugged Performance Luxury Coil-overs. Those aforementioned will provide better overall dampening. These depend more road conditions and how the frequencies are picked up. Some road imperfections will do well while others will have you guessing because It’s not always congruent.
The FSD technology may be more comfortable on the 2024 Model 3 Refresh which has improvements in geometric mounting points and softer rubber bushings, but if one had hopes of having uninterrupted conversations with the family over long trips or to Uber/Lyft part time I advise looking elsewhere unless softer springs are used. Even then its a wonder whether the two being used in conjunction can be considered comfortable. I believe the stocks are 10-12K spring rates. As for tire pressure I tried riding at 42 PSI which was too firm while 40 PSI seems to fair slightly better without affecting how the valves work.
Does anyone know where I can find softer springs to pair with the Koni’s that isn’t used in an already made coilover setup like those aforementioned?
Today I’m going to try retorquing the front strut (78.2 ft-lb) and rear shock (84.8 ft-lb) on ramps instead of jacking one side at a time to see whether that helps additionally for ride comfort otherwise getting softer springs are the only way I can see myself potentially keeping these long term.
In conclusion these may work better for others while for me on Los Angeles roads it’s a no-go. Perhaps I have a terrible stiff chassis and your milage may vary. My car has 50k miles on it with new front lower control arms. All suspension parts excluding sway bar end link and upper control arm to knuckle was torqued at ride height.
Are there any cons to using blue threadlocker on control arm bolt/nuts that mate with the knuckle via 22mm nut?
Last I checked these joints are not suppose to pivot however I do recall threadlocker has the ability to obscure torque readings so maybe this is where the extra firmness could be coming from?
Just to clarify, for install, you would recommend cutting the bump stops in half?
Are you able to get your hands on Special Active "Reifen Reber" variant. They are sold in germany and are an upgrade from US spec.Order received, appreciate your business.
Koni's are going out today, tracking to follow shortly.
IMHO, its not worth it. With inbound freight and duty fees, you'd be approaching coilover territory.Are you able to get your hands on Special Active "Reifen Reber" variant. They are sold in germany and are an upgrade from US spec.
Me too!Someone should reach out to them. I’m willing to join a group buy.
Like your effort...@Silverline Good looking out
Looks like the Reber Edition with slightly softer springs (like grand touring) and more turning to the dampener to harmonize them. If we can get 8-10 people for a group buy, we may be able to reduce some fees.
It doesn’t have to be one person being the head of the purchase. All coming from America and paying separately to create a pool should be enough. I’m going to reach out to them this week for price estimates. Like @tom @ eas says, If it’s still too high the money is probably better going towards comfort coilovers or a partial air suspension payment.
Is there a big difference of cutting the bump stops? Do i need to cut them? (keeping stock performance springs)Half or 2/5th
European SUV’s and stuff have 7-8” of travel for the rod to retract to suppress road noise. The Tesla has like 5”. There’s very little ‘free’ undistorted space before contact also the stop is non-linear so you’ll feel it throw the car into a frenzy even with the lightest bumps.Is there a big difference of cutting the bump stops? Do i need to cut them? (keeping stock performance springs)
Any updates?Installed the Special actives on the rear of my 2020 MYLR. Will install the fronts next weekend.
So far, they seem to make a big difference smoothing out bumps.