Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

FS: *RARE* 20" HRE P101SC Wheels in Frozen Dark Clear for Model 3 (ALL Models) *MINT*

This site may earn commission on affiliate links.
As the title states, up for sale are my recently removed 20” x 9” (ET 35) HRE P101SC Forged Monoblok Wheels in Frozen Dark Clear. These wheels were custom ordered directly from HRE for my Tesla Model 3, with the forethought to machine them with the appropriate bore (64.1mm with a step to accommodate the hub lip on the Performance hub). I went with a 20" x 9" square set up so I could preserve the ability to rotate the wheels and the ability to use the same tires on all four corners.

It's not often (if ever) that you see a set of HRE's pop up for sale, especially a set from HRE's premier P1SC series of wheels. It doesn't get nicer than these!

These wheels are in absolutely *MINT* condition, wrapped in 245/35ZR20 95Y Continental ExtremeContact Sport tires and even include Tesla OEM TPMS sensors. The entire set has extremely low miles, a whopping 4,258.50 miles of highway commuting miles on them. 😃


The cost breakdown for this set of wheels is as follows:

WHEELS:
=$15,180.00 + $1,176.45 Tax = $16,356.45​
TPMS SENSORS:
  • Tesla OEM 433 MHz TPMS Wheel Sensor, Black - 1074812-00-B ($76.10 per wheel)
=$304.40 + $23.59 Tax = $327.99​
TIRES:
=$1,271.96 + $98.58 Tax = $1,370.54​
GRAND TOTAL: $18,054.981​


Reasonable offers will be considered. I'm located in Laguna Niguel, CA, and the wheels have been removed from the car, washed, and placed in their original HRE boxes. Please let me know if you have any questions or would like to see them in person. Thank you in advance!


Without further ado, here are the wheels on my 2019 Model 3 Long Range Dual Motor:



-Shane
 

Attachments

  • IMG_3749.jpg
    IMG_3749.jpg
    248.4 KB · Views: 2,395
  • IMG_3963.jpg
    IMG_3963.jpg
    271.2 KB · Views: 709
  • IMG_3910.jpg
    IMG_3910.jpg
    326.3 KB · Views: 652
  • IMG_3906.jpg
    IMG_3906.jpg
    334.1 KB · Views: 680
  • IMG_3782.jpg
    IMG_3782.jpg
    301.3 KB · Views: 727
  • IMG_3944.jpg
    IMG_3944.jpg
    205.6 KB · Views: 603
  • IMG_3878.jpg
    IMG_3878.jpg
    225.7 KB · Views: 605
  • IMG_3947.jpg
    IMG_3947.jpg
    223.6 KB · Views: 599
  • IMG_3791.jpg
    IMG_3791.jpg
    249.7 KB · Views: 604
  • IMG_3968.jpg
    IMG_3968.jpg
    244.8 KB · Views: 580
Last edited by a moderator:
More photos...


-Shane
 

Attachments

  • IMG_3756.jpg
    IMG_3756.jpg
    256.5 KB · Views: 444
  • IMG_3766.jpg
    IMG_3766.jpg
    232.5 KB · Views: 387
  • IMG_3774.jpg
    IMG_3774.jpg
    239.1 KB · Views: 362
  • IMG_3798.jpg
    IMG_3798.jpg
    322 KB · Views: 337
  • IMG_3806.jpg
    IMG_3806.jpg
    226.1 KB · Views: 318
  • IMG_3860.jpg
    IMG_3860.jpg
    229.3 KB · Views: 330
  • IMG_3879.jpg
    IMG_3879.jpg
    225.8 KB · Views: 296
  • IMG_3894.jpg
    IMG_3894.jpg
    238.4 KB · Views: 289
  • IMG_3902.jpg
    IMG_3902.jpg
    272.8 KB · Views: 332
  • IMG_3903.jpg
    IMG_3903.jpg
    259.3 KB · Views: 550
These look amazing. Always loved the P101SCs. Good luck with sale man.
Monoblock or multipiece HREs are typically hard to sell unfortunately.

Best looking setup on the forum. I learned the hard way trying to sell used HRE’s from my Porsche. Good luck with the sale but be prepared for that final actually sold price. It will make you cry. I did.

Thank you very much, I appreciate the kind words! 😃

These wheels are absolutely stunning, but I can certainly understand the limited market due to the price point. These wheels aren't for everybody, but their attention to detail and build quality are unmatched.

Just like everything in life, there are options, and pricepoint most definitely plays a large role in people's decisions. With that said, there are people every day who purchase this caliber of wheel for their car, and 99% of the time have to pay full price due to the limited number of these on the used market. It's just a matter of time before the right person comes along who is on the cusp of purchasing and will benefit/capitalize on saving a boatload of money. 🤑


-Shane
 
Sold my HREs a year ago off my Audi before I traded it in. As @goin2drt said the sale price will hurt. Mine were only $4k new and it still took months to sell and only sold for ~50% of the new price.
Thank you. I understand, and I do realize they are a "used" (mind you, with only ~4,000 miles) set of wheels, which is why somebody will get a deal that they otherwise would not be able to get on this caliber of wheel. :)


-Shane
 
Last edited:
Sold my HREs a year ago off my Audi before I traded it in. As @goin2drt said the sale price will hurt. Mine were only $4k new and it still took months to sell and only sold for ~50% of the new price.
But until you have actually owned a set of HRE forged or BBS Fi-R’s you really can’t appreciate the difference and you appreciate that in the quality, craftsmanship, weight, durability etc etc.

These will sell and my guess it will be to a local buyer. You really need to see these in person to see why they cost so much. Pictures just don’t do justice for HRE and BBS.

Free bump and good luck on the sale. Someone will really appreciate these.
 
  • Love
Reactions: ShaneXman
But until you have actually owned a set of HRE forged or BBS Fi-R’s you really can’t appreciate the difference and you appreciate that in the quality, craftsmanship, weight, durability etc etc.

These will sell and my guess it will be to a local buyer. You really need to see these in person to see why they cost so much. Pictures just don’t do justice for HRE and BBS.

Free bump and good luck on the sale. Someone will really appreciate these.
+💯! Thanks, @goin2drt. 👊🏻


-Shane