Charge On Solar Australia

[Gareth Oakes]

attached on the grid side of the Powerwall grid sensing CT, meaning the Wall Connector load cannot be seen by the Powerwall.

We had a similar issue at our place when we installed the Wall Connector, as it is connected at the meter box out front and not at the switchboard inside. We ended up moving the CTs from the switchboard to the meter box and that fixed the issue. It cost a few hundred bucks but was worth it.

 

[Vostok]

The latest iOS version of the Tesla app (4.31.6) appears to have fixed the issue of the 3 dots to control the CoS settings randomly disappearing.