You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Pushing 10.5 squared? I'm inThread revival... Just ordered a set of 18x10.5 +25 Advan RG3. Should get here around the same time as the car does. I've done a fair amount of research and I'm hoping they fit with the stock rotors. Seems that most of the few guys I've seen running this aggressive of a setup runs aftermarket rotors that get the wheel away from the upright. Planning on taking the swapping the BT TPMS and running 275/35/18 A052 for street and track setup. I've read MPP has already bent a 19 RG3. With the extra cushion from the 18 and I'll try to stay away from the clubs to avoid the same outcome.
Thread revival... Just ordered a set of 18x10.5 +25 Advan RG3. Should get here around the same time as the car does. I've done a fair amount of research and I'm hoping they fit with the stock rotors. Seems that most of the few guys I've seen running this aggressive of a setup runs aftermarket rotors that get the wheel away from the upright. Planning on taking the swapping the BT TPMS and running 275/35/18 A052 for street and track setup. I've read MPP has already bent a 19 RG3. With the extra cushion from the 18 and I'll try to stay away from the clubs to avoid the same outcome.
I am getting ready to order a set of wheels and tires for autox for a completely stock M3P. Looking at a set of Konig Hypergrams 18x9.5 +35 with 275/40-18 A052s. I think I need 3mm spacers on the front but I am really not sure. Can anyone provide feedback on this setup?
First post BTW...
Did you ever confirm the 18x9.5 Hypergram's fit? I was looking at these for winter setups, just sticking to stock width though.18x9.5 +35 SHOULD work on M3P, but it ultimately depends on the backspacing of the wheel. This varies from manufacturer to manufacturer.
Worse case scenario you can just throw a 3mm or 5mm performance hub lip delete spacer on to make them clear.
Performance Hub Stepped Lip Delete Kit
This kit fills in that pesky stepped lip on Model 3 Performance hubs. Allowing you to run any regular hub-centric rings for your aftermarket wheels. 3mm = Completely flush to stepped hub lip.5mm = Additional spacing beyond the stepped lip (w/ safe thread engagement). Contact us for any...modelplusstudio.com
Additionally, we can help you source those Konigs or other 18x9.5 options. Just message me!
Danny
They work with a 5mm spacers. I have been driving that crap out of them with no issues.Did you ever confirm the 18x9.5 Hypergram's fit? I was looking at these for winter setups, just sticking to stock width though.
They work with a 5mm spacers. I have been driving that crap out of them with no issues.
Sweet, thanks!
I leave them on with the 18s and stock 20s. They just slip on over the lug bolts and sandwich between the wheel and the hub, but I like the look of the stock wheels pushed out a little. You can see a little of spacer in this first pic.Follow up, since I plan on swapping out between winter and summer (stock 20's) does the spacer matter? Do you just add spacers when you put the 18's on and remove them when you take them off or is it not that easy? 19's obviously don't need spacers.
I leave them on with the 18s and stock 20s. They just slip on over the lug bolts and sandwich between the wheel and the hub, but I like the look of the stock wheels pushed out a little. You can see a little of spacer in this first pic.
Thank you so much, appreciate you.
Do you know if the 18x9.5 +25 Dekagrams or hypergrams clearing BBK’s?We just had our annual Tesla club meet here in Fremont and I just had to bring out our favorite cheap track wheels. The consumable kind. No Volk Racing or Forged BBS's on this day. lol.
For fitment reference on a P Car:
I'm running some SSR GTX01 18x9.5 +22 with 265/40/18 NT01's on my P car. I haven't even installed my FUCA's yet and no rubs with only -1 camber front and rear. I was amazed. I can't wait to rock out on -3 degs of camber and see what we can do. I'm gonna mount up these 19x10 countergrams you'll see in the last picture with some 295/30/19 and figure out what alignment settings are needed. That's at the very bottom.
For the most part I'll be bringing in +25 dekagrams for the Tesla Corsa guys as opposed to the +35's. I brought 2 of those sets in black for some buddies.
I love these countergrams: 19x10 +25