For those of you running staggered wheels and a 10.5 inch rear wheel setup (regardless of diameter) --- what offset are you running?
There were a few threads I found of ET42 needing spacers, and I did indeed find this was the case to clear the fender liner. However, my problem was some 20x10.5 ET42 wheels I tested recently, even with a 5mm spacer, they lost hub centricity (due to spacer) and the center cap still didn't clear the center hub nut. So I'd need a 10mm spacer, which in-turn would also require longer wheel studs, which I don't really want to get into. Then it would clear the fender liner, the center hub, etc... but spacers + new studs = hassle, cost, etc.
From what I have seen, the best size for a 10.5 would be ET35 as that would hopefully clear (center cap), clear (fender liner), and so forth. However, I've got a lead on some ET28 10.5 rears ... and I know they'll poke a bit. Not really the look I love, but maybe something I'd consider.
If you have experience with 10.5" rear wheels, please post up your photos and offset data, so I can get an idea of how various width tires, wheel offsets, etc at this wheel width might look... thanks so much!!!!
There were a few threads I found of ET42 needing spacers, and I did indeed find this was the case to clear the fender liner. However, my problem was some 20x10.5 ET42 wheels I tested recently, even with a 5mm spacer, they lost hub centricity (due to spacer) and the center cap still didn't clear the center hub nut. So I'd need a 10mm spacer, which in-turn would also require longer wheel studs, which I don't really want to get into. Then it would clear the fender liner, the center hub, etc... but spacers + new studs = hassle, cost, etc.
From what I have seen, the best size for a 10.5 would be ET35 as that would hopefully clear (center cap), clear (fender liner), and so forth. However, I've got a lead on some ET28 10.5 rears ... and I know they'll poke a bit. Not really the look I love, but maybe something I'd consider.
If you have experience with 10.5" rear wheels, please post up your photos and offset data, so I can get an idea of how various width tires, wheel offsets, etc at this wheel width might look... thanks so much!!!!