Hi everyone. Im pretty new to this forum. I have red a few threats from here and that's about it. Recently I got TESLA P85 which was hit on the front. So the now we are working on the body repairs while doing some troubleshooting on the electric problems. Basically when i received the car, it was dead. So i had to connect its 12V battery terminals from the front reinforcement to my other car to wake the car up. After it was connected, the dash and the screen light-up and there were 6 message errors: low coolant, battery many have to be replaced, car needs service, airbag, and 2 other ones that i cant remember now. Anyways, i was able to put the car in D mode, but the car didnt move at all. I didnt hear the click of the 400v battery solenoids, so I assume that the 400v battery was not turned ON. My car had dc-dc converted damaged, so I had to replace it and my signal connector is destroyed, therefore its not connected yet. I dont know whats the Signal Connector for exactly, but I assume its somehow important. Overall, i have some other connectors unplugged, like headlights and i think 2 other ones. So maybe thats the problem, not sure yet. I just throw the facts, something to think about why its not moving. The battery has about 170kW on it yet. So its shouldnt be a problem. BTW I connected both contacts of the the pyro fuse with a wire. I heard if its not connected then its not going to move.
Alright, Im pretty sure I will need Your Help and Advice.
Cheers
Alright, Im pretty sure I will need Your Help and Advice.
Cheers