Search results

I had these on my previous X and had another set of adapters made so I could fit them on the Y. There were some delays with the anodizing so it took a little longer than I would have liked but the timing worked out since it's just starting to warm up. Tires are 255/40Z/20 Continental...

Have yet to install, but these look like they're constructed well. They are HEAVY though 😂 They sent me a glossy version instead of the matte, so I had to return it and pray they would refund me. Crappy CS bot aside, they did what they said they would and I reordered the matte from another...

Anybody have success with aftermarket BT TPMS? Need a set for my wheels.

Those of you with aftermarket heated steering wheels: how would you compare the heating element effectiveness to OEM? I use my heated steering wheel all the time, but just realized that the AE special heating quality may not be as good.

Finished editing the rear suspension R&R video!

Disclaimer, I don't know anything about window tinting! I've been wanting to tint my windows, but didn't really want to spend any money on it. Saw a precut 3M kit for $20 and spent another $10 on a cheapo squeegee kit. I figured worst case, I'd rip it off and sulk in the corner. The sun was...

I have no affiliation with the company, 'm just a satisfied customer. For $60, this was totally worth it. Coming from an X with the EVOffer power frunk I knew that manually closing the hood every time was a pain. Prior to the power frunk we'd never open it unless we wanted to store something...

This thread is for the general discussion of the marketplace listing 2023 Model Y Performance OEM suspension. Please add to the discussion here.

I'm making a set of adapters to run for an existing set of wheels I have. I am using the 20" inductions as a baseline since they are square. It looks like most people are running 18mm on the OEM inductions without rubbing? Does that sound correct? Or, is 15mm a safer bet? My car is slightly...

I'm curious what people are seeing for their factory alignments and what they're seeing after an alignment. Mainly curious how much adjustment camber, caster, and toe adjustments are available from the factory. I see the specs, but don't see the range. Wondering if I'll be able to hit the...

Before I design my own…is anybody aware of a shim that sits on the contour of the bars and provides a flat upper mounting surface? My direct mount kit sits funny because of the contour:

Anybody else with a ski rack hearing substantial wind noise? For me, it starts around 15mph and increases. I removed the rubber T slot strip during install and wonder if that might be a major cause?

Obviously you don't want to leave your car at 0%, but I'm curious how much damage is actually done letting the car sit there? and, for what period of time?

I was toying with the idea of a frontend PPF for my new Y but ultimately decided that it wasn't worth spending 2k+. Instead, I compromised on DIY PPF for the headlights and foglights. Materials were inexpensive, I think I paid $40 shipped on eBay for 3M film. I spent about 2 hours installing...

Looking for some mesh wheel inspiration. BBS E88, Work VSXX, even the LMs. Debating if I want to run my 20x8.5 square Work Brombachers on the Y, or go with something different. The centers are currently black, but I would like to rebuild them with bronze centers.

This thread is for the general discussion of the marketplace listing 2016 X P100D, black/carbon fiber, 6 seats, electric frunk, XCare. Please add to the discussion here.

Has anybody done this on their X? I've read a few threads and want to do this myself. Sounds like ( ;) ) the rear trunk area and doors yield the most bang for the time.

Finished editing some footage from the 12v replacement and it's online. Hope it helps somebody! ...psssst...don't waste your money on aftermarket batteries!

I don't own a MS, but if you need to correct your camber here are some free resources that might help you. https://teslamotorsclub.com/tmc/threads/alternative-diy-refresh-model-x-rear-camber-correction.311755/

I was thinking about this over coffee. Anybody who is considering spending $400 for the Macsboost kit could DIY this for next to nothing. I need somebody to confirm the relationship between the spacer thickness and the camber, but I don't have a refresh X. If anybody is in the Bay area I'd be...

Looks like this is finally live. Had a few questions for @XCare EV that might be helpful to clarify: 1. This is a HV battery coverage. Assuming the 12v battery is EXCLUDED (as it is in the premium coverage)? 2. The plan selection page states a $500 deductible and a $30,000 limit of liability...

Seeing what kind of interest is out there! 2016 Model X P100D, 6 seats with 67,500 miles 265 mile range at 100% charge Midnight silver metallic Black leather with carbon fiber interior Free unlimited supercharging: transferrable, SC01 Free lifetime data connectivity 20x9" square wheels and...

In the Bay area. Looking for recommendations.

Did a search but couldn't find any references to this code. I see TPMS data on all four corners so I'm a little confused. Tried cycling my wheel diameter but still get the error. Anybody familiar with this?

I need to replace the film on my front bumper and it looks like it was originally a precut piece. Doesn't look too bad, but neither does installing tint. I'm not great with cosmetic stuff like this but I kinda want to give it a go. Anybody have first hand experiences?

My girlfriend's mom has a delivery date coming soon and she is torn between the white/white that was originally ordered vs a red/black. If anybody is in the area and willing to show their car, please let me know.

Posted this in the wrong forum, but might be helpful for other divers. I have a 6 seater and wasn't sure where I would fit all my tanks. Originally I had four tanks in the trunk with my 35g gear box on top of them. I knew I could fit one or two tanks in the front but I wasn't sure. When I was...

Originally drove down to Monterey with two tanks up front and two in the back. Two totes in the trunk. After picking up some refills I wanted to see how many fit up front. Turns out there's plenty of room for four tanks!

Saw these on sale and couldn't pass up a great deal. I didn't feel like pulling all the studs out so I'm going to run them as is. I've run the studless Hakka 8s on my F350 and loved them. Anybody have experience with these? I'll report back after I get a chance to drive on them. Grabbed a set...

Why is this even allowed? The FS forum is inundated with them.

I guess Tesla stopped updating the older MX. That's first time I've seen the supercharger graphic!

One of my turn signals stopped working so I decided to replace them with the AP2 sidemarkers. Personally, I like the smaller LED strip vs the whole sidemarker lighting up. Install was a few minutes per side. Have some footage I need to edit and I will post a video.

Didn't like the loss of light. $25- new in box $20 - one used for a few days without box Located in CA (South Bay).

Bought new from Tesla, prefer local pickup in SF Bay area. 5-15 for $35 14-50 for $45

Bought everything during Black Friday but never got around to installing. Spent about five hours today getting everything set up. The dashcam is the 900XPlus by BlackVue with two channels. The CM100 LTE module is optional, but I liked the idea that I could "just upgrade the dashcam" in the...

Feel kind of silly having to even ask.. I know a 2x double press on the keyfob will open the door, but I just want to be able to manually open the door without the driver door flying open into traffic. Currently, when I walk up to the car and it unlocks and I press the door handle nothing happens.

Has anybody else had their car randomly decide to not recognize the keyfob? I know the batteries are brand new, so that's no the case. I tried holding the key in the rear, lower door sill area. No dice. Finally popped the battery out and reset the keyfob and it worked again. Very odd.

$300 shipped, comes with a 100v, 5-15 adapter. Or, local pickup in South Bay area.

Spent some time at the shop today and checked this off my TODO list. The install is pretty straight forward...but the instructions are not great. Things I am not happy with: You must use zip ties or double sided tape to secure the ECU and emergency release module. IMO, this is unacceptable...

Here is some data on the combined wear of about 4500 miles on sticker Toyo tires with a factory alignment. Not seeing anything too crazy, but wanted to rotate my tires and collect some datapoints. There is going to be some wiggle room on the measurements, but I tried to measure in similar locations.

Originally posted this in the X forum, but adding here for other legacy owners. Had a chance to play with V11 on the X and I don't echo the same concerns a lot of other people have. Ignoring the lack of attention to detail with a lot of the white spacing with words and icons; I like it. Things...

I had a bunch of warranty work done at the dealer, some of which included replacement parts for the shudder. The entire front end of the car was apart. After I picked the car up I noticed that it was pulling right and immediately suspected an improper alignment (or, in this case...no alignment)...

first big rain of the year. noticed while i was driving i would get a warning on my dash telling me autopark is disabled. makes sense if i am in reverse, but it persisted my entire drive. super annoying. is this abnormal?

Though, I still wish you could fold the front seats down. Thought I'd try to fit my trainer in the SUV before grabbing my truck. Would have fit if my sliding seat tilt motor wasn't broken 😆 It also turns out you can drive with the hatch open. It'll beep at you for a few minutes then it'll shut up.

While it isn't perfect, I'm impressed with how far the developer was able to take it. For $5, I'm more than happy to support the continued development. The app uses your phone to encode the video output and stream it over a local VPN. The browser is as responsive, if not more responsive than...

Bought this thinking I wanted to carry my skis outside, but instead decided I'll just use my ski bag inside. Price: $625 Condition: New Make / manufacturer: Tesla / Yakima Bike Hitch Rack: Model X/Y Hitch Rack Designed exclusively for Tesla, the Model X/Y Hitch Rack is a premium tilt-down...

for those of you who have an electric frunk installed i am curious if you are still happy with the product. i was really interested in this, but read some bad experiences with excessive 12v battery drain as well as unintentional frunk openings tia

looks like a rip off of the 1up, but with struts. integrated LED is cool. surprised they didn't include their "traildoc" with the unit. also surprised it's 1400

Short vid up on replacing your door handle. $8 each, not bad.

I want to tint to front doors and don't really want to cut everything out. Does anybody have a source for precut pieces? Everything I see on eBay is a no-name brand film. Thanks.