Search results

20x11 et26 285 r888

Looks great, it doesn’t rub on the dimple of the knuckle? This is my 20x11 et26 with mpp rotors and a 285 eagle f1

Won’t clear the knuckle with a 10 that’s for sure. The 12 is gonna be a hair if it even clears. Good luck

Just sent you a ton of photos to the email

Exactly. Dm me an email and I’ll send some photos over

Thanks. It’s the bumper cover the lower cover and bottom tray. All 3 parts have to be replaced for it to work, and even after that the bumper has to be modified by the tail lights for it to work. As far as the lights that go on the bumper I still have not decided what to do with that, therefor...

Just replaced the rear bumper on my m3p with the highland rear bumper not the best photos but I think it looks great

These are 20x11 with 285s all around haha Camber is around 3.2 front and about 2.7 rear. I can get more photos if you guys want to share it on your website

Ya you just need a shorter tire that’s all

15mm spacer would depend if you have a performance model or not, on the performance model the hat of the rotor is thinner therefor you might need an 18mm or a slip on to your 15mm if it’s bolted on. As far as camber goes my setup was on stock upper arm

This is with mpp rotor stock knuckle

There is 1mm of clearance with stock m3p rotors after shaving the knuckle. You cannot run this with stock rotors without shaving. However with mpp rotors it clears

That’s is correct, it will clear the knuckle with the mpp rotor other then that you need to shave the knuckle a little

Specs were posted already

Some photos of the 20x11

Some photos as promised

Will do!

Love these wheels

One more

Some photos from model 3 challenge

It’s 245 front 295 rear

I’m going to be selling this set with the pilot sport 4s’s since I got apex wheels

No rubbing, the car is on mpp comfort coilovers

285/30 offset is et26

Ya I’ll get some better photos later

Thanks for the awesome service as always!

Thanks, this setup is intended for track use and is at -3 front camber. My daily wheels are 21” uberturbines

Thank you! I am running a 295/25 rear and a 245/30 front. I am also running 20mm spacers front and back

Just put on my 20x11 apex vs-5rs

I’ve been following this thread for a while to educate myself and I pulled the trigger on my first track oriented setup. I went with a 20x11 et26 apex wheel with 285/30R20 eagle f1 and it is literally a couple of mm away from the front knuckle. Couldn’t be happier with this setup!

Not the best photos but you can see how they fit. I feel it gives it a nice oem + look

Ya I was thinking the same haha any good suggestions? I’ve never been around that area.

This is not with the stock myp tire, that would never work

Are you guys camping or staying at a hotel/motel?

Awesome I’m really looking forward to this event, specially since it’s at laguna seca!

Here is a side profile for now

Yes the overall diameter is the same, I think they complement the wheel well opening pretty well, but they are aggressive since it’s a 9.5 front and 10.5 rear. Cool thing about this is you can do a double stagger and run a 20” uberturbine in the front. I’ll get a few more angles.

Just registered for the laguna Seca event! Who’s going?

Fitted 21” myp wheels on my m3p for anyone who is interested in doing similar size wheels just know it works. Ride is very compliant and not as harsh as I would expect it to be.

Sold please remove

Willing to do $4000 flat on this set of wheels!

Price drop to $4200, will meet buyer half way if needed

Yes tires are the nt555 g2’s there is sensors but they are for the older model not the new Bluetooth version

Price is OBO I’m open to offers, just mounted my new wheels so need these gone

Thank you sir!

Thanks, I’m running mpp coil overs but these would look good at stock height or with a small drop since they’re close to oem specs and offset

Bump price is OBO make me an offer