Search results

I had a similar situation a couple years ago. After about a month oder returned. I cleaned again but used 2 cans KLIMA (if foam overflowed I let it run down then finished the can) and followed the full procedure on the can (wait 20 minutes then fan open high for 2 minutes open all vents and on...

https://www.ebay.com/itm/266587244749?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338794542&customid=&toolid=20012&mkevt=1

I have a 3 and a Y. On the 3 I'm trying VION HEPA filters. They claim 90% better flow (offsetting the smaller frontal area of the filter) but most important the foam on edge is only a thin strip on the leading (intake) edge of the filter. I surmise that design leaves the drain channel clear...

Any issue with the clip coming off when removing the filter?

Looks familiar and I'm now on 2024.3.25 and the issue continues. Some post mentioned to expect a fix with 2024.12.X. Center Console USB-A ports.

The guide pins get corroded and they clean them and lubricate in areas of salted roads. Every 2 years Tesla wants to check the brake fluid for moisture and they use a test strip for that. I would perform that during the 2 year fluid check just as preventive maintenance. They also check brake...

Here is one : Cabin Air Filter Clip (Bad Smell Preventer) for Tesla Model 3 and Y

The errors returned after about 2 days. Now continuing at odd times When overnight and asleep. Anyone find a solution yet or are we waiting for 2024.12.XX?

2 cans of Klima and new filters. Follow directions and do 2 full treatments raining each can. I do this every 6 months. Also run with recirculate off unless really needed. The fan runs for 15-20 minutes when parked so leaving recirculate off when parking also helps. Lastly, try one of these...

Temperature most likely the reason. I had NO RESETS with the heated model. In NE it dips to the single digits but below 40 heating is needed. PM me I can add some new info.

No new errors. These are months old mostly from a car wide check prior to ending warranty. They are not in affect and months old I just want to clear them out.

How do you clear old service notifications in service mode? I have notifications going back from months ago and can't find a way to clear them. Thanks

Well after almost 2 days of no errors, Sunday I had 5 UI_a112 notifications at various times and I only drove the car one. I think Tesla is waking to gather data athopugh my MY with AMD processor has n o UI_a112 messages. Same software.

FWIW, today was the first day in a while no UI_a112 messages. None for 30 hours. Makes me think it occurs during a data transfer to Tesla during this FSD data collection push.

FWIW my 2020 M3 had the 2 USB-A ports in the forward pedestal and intel processor. I get the Ui_a112 messages on waking. My 2022 MY with the glove box port and AMD processor with a 256gb Samsung flash gets no messages. Both cars have 2024.3.15.

I'm having same issue on a 2020 M3. Tried switching from 256gb to 128gb. Tried format in car and on MAC no change. Tried different splitter still to change. Another post said fro Tesla it would be corrected with software version 2024.12.x. In the early days of FSD Beta, you could not format...

It appeared with 2024.3.10 so it must be software related.

Youn probbaly did this but run the format in the safety menu if you haven't.

Anyone getting the UI_a112 message using a 128GB flash drive?

Did you get the a_112 return overnight with the USB disconnected?

I too just started seeing this error with 2024.3.10 while car is asleep and Sentry off. replaced USB flash drive and same error. Drive formats OK and copies dash cam just fine. Will continue with scroll wheel reset until 2024.12+.

The Ohmmu V4+ Heated with V29 firmware and Model 3 configuration continues to work flawlessly since December 2023 installation.

Any tire shop as long as they know where to place the jacks. Discount Tire or Americas Tire should know how. The 3 has been around a while. Also TireRack.com with would have mobile or recommended shops. In that case you order the tires and ship to installer (or TireRacks mobile pick them up)...

Great that Tesla took care of it but if not I would want Electrified Garage in Amesbury MA for a second opinion.

Another post on this, may not be related but check calendar sync off as that was an issues way back but was corrected. New iPhone app 4.31.0 out this morning.

I was working with service and they relayed to the app development team. It was an app issue in that case and they put out 2 revisions within the weekend and the 2nd one corrected the issue. I have a 3 and Y and they both were waking every 6-8 minutes then sleeping again. I timed it...

FWIW a year or so back with an app update the car would wake every 10 minutes or 20 24/7. Reported and an app update was issued. It was believed if calendar sync is on it wakes to sync the calendar. That was then but something to check.

Try charge or test the new battery to make sure no faults. When a battery in installed the car initially stays awake for 6 hours chasing the new battery and testing. May be another issue. When the battery was changed did you completely depower the car? One needs to open the driver and RR...

Go to service notifications on the main page in service mode and check for messages. Look up the reference number. The message generated should have supporting information. BTW the Clarios battery is a Varta B32 I believe. Also in the Tesla app, you can ask a question by making a service...

Here in the US in service mode one can select an Atlas battery or a Clarios battery. The specifications you show sound similar to the Clarios. Go into service mode (red bordered screen) select LV page and change the battery type. To enter service mode, on the software page press and hold the...

I have same issue with my wall connector. Previous wall connector showed a wand fault so replaced gen 3 charger. Still have door opening issue. Opens with app, or when pressing door, or from touch screen. Just not from charger wand button. Charger wand will release from port OK just not...

I had same issue, removed old charger with a warranty replacement . Initialized but old one still in app. Sent note to charger support and within a couple of minutes they removed it. Then to add the NEW charger to the app app right 3 bars press and select "Add Product". When done I also...

The current Ohmmu for model 3 is heated and works at low temperatures however, if your 12 volts dies after a week twice there is something else. I would access the service mode and see what messages are present to help point to the cause. In service mode, you can view the LV system to see if...

If the intake screen (way down inside the opening) is free from leaves then the condenser may have mold. A foam AC cleaning like Klima or Kool-it will help. I use 2 cans Klima when I replace my filters every 6 months. No stink.

I have used both with no issues.

Both work. Pick what suits your situation.

Check the intake in the frunk for leaves.

Lead Acid 33Ah or greater will always work. But the latest complaints about Ohmmu were using the unheated model as temperatures have dropped versus the heated model with updated firmware which works well. Plus with the app it can be monitored constantly in detail. Batteries after Dec 2023 have...

The latest Ohmmu with bluetooth and heating using V29 firmware and configured for model 3 is working well for months. After market battery technologies are changing and improving all the time.

My heated version continues working perfectly with the V29 firmware and Model 3 configuration. The battery will run at about 60F when 32 outside.

Try the contact section in the support section on the Ohmmu website. contact

The recall covers hardware 4.0 cars.

In addition to other possibilities could that small drain hole become blocked? I notice in the video he seemed to have more humidity at the bottom of the filter AFTER he installed the clip.

Selecting advanced un the software menu may help. Also, updates can initiate when the car is asleep. Make sure there isn't a program or app keeping the car awake full time.

This morning outside air temperature 10f garage temperature 36f Ohmmu temperature 60.1f. No warnings. No messages. It just works.

Additionally the windows drop about 1/4 inch to prevent freezing in place. You hear it when exiting the vehicle.

Below 41F the charge port won't latch as a software change a while back to prevent frozen plugs. It still charges and defrosting car warms the port slowly as well. See winter operations in the manual.

In the link above there are Android instructions.

Yes I have an IPhone.

I only saw V29 following the instructions for the special app to install V.29. Once in stalled (takes about 30 seconds, one must install the configuration for your car (i.e. model 3). The reason is the firmware V29 is used on most of the batteries so it then must be configured to the Model 3...