Search results

This thread is for the general discussion of the marketplace listing FS: Tesla Model 3 Performance Stoptech Rear BBK (Adonized Grey). Please add to the discussion here.

This thread is for the general discussion of the marketplace listing FS: APEX VS-5RS wheels (satin black) 19x9.5 ET29 for Tesla Model 3 Performance. Please add to the discussion here.

This thread is for the general discussion of the marketplace listing WTB: Telsa Model 3 performance rear caliper set. Please add to the discussion here.

Hi Guys, I'm running 19x9.5 with 265/35/19 tires on Model 3P and I noticed at speeds of 70mph+ I get a strange oscillating thumping sound emanating from the car with a little vibration under my seat. It seems to happen on and off when I'm driving. I could drive a couple miles and then it slowly...

Hi Guys, Just wanted to post some information the MPP.R BBK install for those who might be interested. Tools needed: -21mm socket -10mm (1/4" drive) -T-27 torx (1/4" drive compatible) -E14 torx socket -1/2" drive -3/8" drive -extensions -torque wrench -9V battery with wiring adapter to...

Hi Guys, M3P owner here. I’ve started noticing some random low speed vibrations from the steering wheel at speeds anywhere from 20-40mph. Seems to happen when I slow down. It lasts for about 1-3 seconds then goes away. It’s not consistent and random. 7500miles on the car. This started...

Hi Plaid owners, Anyone tracking theirs with some mods such as: -200TW tires -MPP or UPP suspension/brake mods Would like to get an idea of how the car behaves on a road race track (HPDE). I've seen two at my local track run some pretty decent times but I didn't get a chance to ask them if...

Hi Guys, Just wanted to give you a modded model 3 performance owners perspective of a test drive of a plaid model s. My car has pretty much every suspension/brake mod from MPP on it and I'm running lightweight 19" wheels with 200TW tires. First and foremost, the elephant in the room: the low...

Hi Guys, This past week I installed MPP swaybars on my car. Just wanted to give you guys some comments about the bar installation and feedback on both street and track. Install: Front: -This process is a bit involved, you have to remove two panels: first one under the front bumper – this one is...

Hi Guys, I have the front anchor installed but not sure exactly where to put the rear anchor. I removed the rear seat and I do see a bracing with bolt to put it but it would require bending the anchor somewhat. Appreciate assistance on where to properly bolt it to. I've attached a picture of...

Hey Guys, I'm sure all of you that have been on track with your model 3 have noticed how terrible the stock seats are at holding you in during maneuvers and how it's probably just as or more important as any suspension, brake or tire mod for the car. The seat is what gives you: -the feel of...

Hi Guys, I thought I would give a review of the following kits and my impressions on the street and track. I bought both kits and compared them in both street and track environments. I want to thank Jesse and Sasha at MPP for the help on the transition from Ohlins to MPP as they guided me...

Ohlins R&T MU00S1 -purchased new and put only ~1000 miles on the kit -can be installed on Model 3 or Model Y LR/Performance -everything is in excellent condition -comes with all necessary hardware and manuals -comes with original packaging and boxes Asking $2650 plus shipping or free pickup...

Hi Guys, The first time I opened the tow hook port at the track, I saw two wire contacts floating. Anybody know what this is for and it needs to be connected to something? Thanks Steve

Hi Guys, I recently changed my stock uberturbine wheels to 19x9.5 with 265/35/19 tires. Obviously I’m not running the factory 42psi cold pressure and running 33psi cold instead. Due to this I have the little yellow tpms warning. I haven’t tried resetting but will this be a permanent warning or...

Hi Guys, I did a brake flush last night, ended up with a nice firm pedal. (I used motive power bleeder and just to be safe did a 2 person bleed (3 x5 pump) on each corner). Unfortunately, this morning I ended up with a squishy soft pedal. Now if I try to brake hard I lack the travel/feel I...

Hi Guys, Does anyone know what the full adjustment range is for the MPP sports coilover rear shocks? I couldn't find anything on MPP's site. If I look at the KW V3 kit for model 3 it says 16 clicks for rebound and 12 clicks for compression but I'm not sure if that's applicable to the MPP...

Anyone have any of the following electronic exhausts installed? -thor -enginevox -hannshow any feedback would be appreciated. Thanks, Steve

Hi Guys, Just wondering if anyone has tried a 275/35/19 tire on model 3 and if there are any rubbing issues with the steering knuckle? Wheels are 19x9.5 ET 29. Thanks Steve

Hi Guys, Just wondering if anyone is running Paragon 2 or Girodisc rotors at the track or at HPDE events and what the feedback is performance in regards to: -brake fade (after many laps) -stopping power -cooling (reasonable caliper temps) Just trying to see if I can invest in rotors+pads+lines...

Hi Everyone, I spoke with MPP and they mentioned that most aftermarket performance pads don't have the spider clips that prevents pad rattle when installed. I was wondering if you guys knew which aftermarket pads don't (PFC, Porterfield, Ferodo, Endless, etc.) Thanks Steve

Hey Guys, Ohlins R&T manual states to NOT use the rear upper rubber isolator. I've had it on and off and do notice that it's slightly harsher without it. (since metal to metal contact). Just wondering why Ohlins insists on removing it (for Model Y it stays on) and curious if anyone knows? It...

Hi Guys, I'm debating between UPP and MPP camber/toe arms. I noticed that the MPP ones use a more convenient adjustment mechanism in the middle of the arm vs the UPP ones that you have to loose jam nuts at either end (some alignment shops struggle with that approach since sometimes using a...

Hi There, I was wondering if someone has the model 3 performance (recent 2021-2022 model) ride height measured from ground to inside of fender lip for front and back. I've seen some posts that maybe confirm around 28" but just want to double check. Thanks, Steve

Hi Everyone, I'm a new Model 3P owner and wanted to see if anyone is possibly willing to give me a ride in a car with MPP sport coilovers? Looking for someone in Socal - preferably in Orange County. Just trying to make a decision on coilovers and wanted to see how they feel on the street...

Hi Guys, I recently bought a 2022 model 3p and I noticed that I don't have some the arcade games that my friends 2019 model 3 LR has. I don't have missile command, asteroids, centipede, etc. Is there a way to enable them somehow? Thanks, Steve

I'm not sure if this is a strange question, but wondering if someone ever compared both the Plaid and M3P in terms of driving dynamics? I know the Plaid is alot heavier but is the fun factor the same or better since it has so much more power?

Hi There, Just wondering if anyone has managed to install a Recaro or Sparco (adjustable) seat in a M3P? I find the stock seats lack support. I know Unplugged Performance sells brackets/Sparco QRT kit but I'm looking more at an adjustable 2 piece seat like a Sparco SPX or Recaro Sportster...

Hi Guys, Potential M3P owner here (coming from F80 M3). Test drove the car a couple times and really like it (especially for the value). Wanted to see if anyone else has come from the BMW M platform (F80/F82) and have regrets or quite the opposite for that matter. Looking to do some...