Search results

This marketplace listing has been re-listed.

This marketplace listing has expired and has been removed.

Still available if anyone is interested.

Additional photos.

This thread is for the general discussion of the marketplace listing S Plaid winter set - 19" STANCE SF10 Matte Black wheels with Dunlop winter tires. Please add to the discussion here.

Two tubes from home depot: VPC 6 in. X 24 in. ABS SDR-35 Riser Pipe 6006-2 - The Home Depot Find and purchase/download a Duracell battery image from etsy Then print the duracell logos on sticky posters at fedex print center to apply to the tubes. The size was 20 x 24 to cover those specific...

I never found a solution.

I have this issue as well. Every time it rains my car stinks. Tesla has replaced both my cabin air filter as well as used the Airco Clean but the smell persists. The smell was there the very next time and every time since when it rains. Service center can't replicate the issue since I can't...

Did you end up figuring this out? I have the same issue on my 21 refreshed S. They changed the filter as well as used the Airco Clean but the smell persists. The smell was there the very next time and every time since when it rains. The smell is terrible. It's driving me crazy and I can't...

Sold!

I loved the look of having the car sit lower than the "low" setting in the suspension menu which is why I got the links. When it looked the way I wanted, I was driving around worried with the potholes that are in my town. It just didn't work for me but obviously will for others since this is a...

Price dropped to $350 if anyone is interested.

RSX-1 PLAID (2021+) Ride Height Adjustment Lowering Link Set (Brackets) For Tesla S/X Plaid & All Non Plaid Versions - Two-Tone Black on Black Electroless Nickel Plated I installed these on my Plaid S but the car was too low for my liking so I removed after a couple of days. I originally paid...

My seats are back in so no way for me to look under there at this point. The car is my daily driver. My wife and kids wouldn't be happy if the seats were still removed five months later!

Good luck on your project! The error codes from the passenger seat disappeared on their own once I plugged the seat back in. I would imagine it would be the same on the driver's side but I didn't try that seat.

Here are the after photos and the weight reduction by item! Weight of each item: Trunk top cover 4.5 lbs Trunk bottom cover 4 lbs Rear floor mat 2.5 lbs Rear seat side cushions 1.1 lbs each Rear seat bottom 17 lbs Rear Seat top 40 split, 20 lbs Rear Seat top 60 split, 45 lbs Front passenger...

I decided to remove my passenger seat and rear seats to reduce weight for the drag strip and I'm posting the process for others who may find this useful. After spending 4 hours and removing many screws to explore, I learned that this is a very easy process with minimal tools needed. A flathead...

I fished a different thicker wire starting from inside the console out the back. I first pulled open the kick panel on the left side of the center console, which made it easier to see the wire that was sticking out or the back of the console. I then taped the radar detector wire to the wire I...

VIN assigned an the car is on the way. If anyone is interested, you could have this car in the next week or so.

Selling my model S reservation. I reserved a Plaid and Long Range a year ago and took delivery of the Plaid. Black on Black, with ebony interior. 21" rims in configuration. Price is $15K less than if you order today, and delivery is imminent. I was told a VIN would be assigned soon and...

So many posts on these forums have helped me and I feel the obligation to help others that way I'm giving as much to the community as I'm taking. Very happy to hear this was helpful for you. Who knows, maybe something you post will solve a problem I have in the future. Enjoy your Plaid!

Here are a couple of photos that may help. In terms of the airbag issue, I ran my wire (blue arrow) along the track where Tesla runs their wires, knowing this path can not interfere with the airbag. I have a video of how to pull out the A Pillar trim but can't find a way to attach it here...

I loved my V1 for years and even bought the V1G2. With Savvy not working on electric cars (or at least Teslas) I tried JBV1 but wanted a seamless solution. I switch to the Redline 360c which has a less annoying startup sound, and many gpa features I like including auto muting if the same...

My car didn't have the brake controller! I think they had it in plaids built at certain dates but not others. I got the connector from Tesla but when I went to look for the brake controller I couldn't find it. Other members had a similar issue with not finding it so it must be based on build date.

I pulled the complete pillar cover away which you can see best in the fourth picture I posted. Since then some people said they have done this without pulling off the cover at all. By the way you mentioned I went through all that trouble to use the cigarette lighter socket. That way my whole...

I was able to get it through without removing the charging pad. If you work the other way and looking for a small opening in the inside back corner of the center console, you can push a wire through from the inside of the console to the area under the dash and find the path that way.

I don't know where to access 12v behind the mirror since I personally removed the mirror trim to route wires that I brought up from the A pillar all the way to a blendmount adapter on the mirror. Removing the plastic pieces was an easy process and mine weren't held so securely that anything...

There are two plastic cover pieces. The bottom/smaller one can be removed all together and the larger one can slide down on to the mirror stem to access the wiring. This video shows the model 3 mirror housing removal which is the same housing in the new model S. DO NOT TRY TO REMOVE THE...

I'm interested in knowing which one matches the spoiler as well so that I can order the matching color.

I'm not having the laser problem but I've heard phones can cause this especially with the iphones face unlock feature. Do you think that could be it?

Happy to hear my tutorial was helpful and nice to see your modifications to use the obd port. Posts like these have helped me over the years so I always want to contribute my share back to the community.

Same here, the problem seems to be fixed with the 2022.4 update.

Mine is a 2021 as well. Not sure how to find the build date but if someone tells me how I can post that information here.

The conclusion to my service center visit was that the problem exists and Tesla is looking in to a solution via firmware update. Here is the actual note from the invoice. Confirmed customer concern, found noise to be originating from triple camera fan. This concern is currently under...

I was wondering why my radio keeps turning on after locking as well. Interesting observation about the seatbelt. I also have the seat belt buckled in via an extender which makes it easier for the kids to buckle their own belts when they get in.

Mine makes the same noise as well. I made an appointment in early January to have them take a look and see if there is a solution.

I don't know for sure but I don't think it was a voltage issue since the cigarette lighter power source is also high (15.1V in my car) and that powered the V1 just fine. Valentine1 states on their website that electric vehicles have an issue with SAVVY but I'm not sure what causes the issue...

I didn't try the OBDII power source especially because I wanted the mute feature. If I still had my V1, the OBDII source could have been a good solution. I hope your car arrives soon, I know you'll enjoy it. In regards to the adapters I'm sure I could have cut down by one if I figured out...

The Savvy product doesn't work on the refreshed Model S. I tried on my plaid a few weeks ago and it wouldn't power on the radar detector.

Looks great! I'm in as well if you have enough. I would like to stop kicking pebbles up the side of my car...

Definitely for your next Tesla! I first tried to install without removing the A pillar cover, then spent an hour trying to figure out how to remove the cover only to figure out it just pulls out which isn't how the previous generation was. I'm glad I pulled it out because I found that wiring...

After much reading about the difficulty of finding a switched 12v power source in the refreshed Model S Plaid, I decided to go a different route to achieve the same result. I mounted my Escort Redline 360c with hidden wires from the cigarette lighter adapter all the way to the mirror which...

Are anyone else's footwell lights really dim? I checked and the light strips have been pulled through the slit that's cut out for them to fit through. Is there a setting to increase the brightness? Mine are barely visible on both the drivers and passenger's side, almost as if they aren't on.

There are a few power sources that TMC members found in this thread, specifically on pages 10 and on. https://teslamotorsclub.com/tmc/threads/diagnostic-port-index.98663/page-10

While driving to Boston from DC, the Navigation kept telling me no No superchargers available within range of destination. There about 10 supercharging stops in Connecticut and MA stops between the Vessey St (New York) supercharger it has me stopping at and Boston. Any idea why this happen? I...

The link in the first post here is still active: Created worldwide cybertruck reservation tracker

I have reservation position 2,390 and for Tri motor position 807. Anxiously waiting for these things to start being produced and hoping they start with tri motor.

This tracker will give you your accurate position. I believe they skipped some numbers at some point in the reservation numbering system. Created worldwide cybertruck reservation tracker