Hi Tesla Motors Club community,
Allow us to introduce ourselves one again - Many of you on TMC may recognize us from the involvement and role in the aftermarket automotive wheel sector for many other enthusiast platforms that you may have owned previously or currently own, such as the WRX/STI, EVO 8/9/X, R32/R33/R35 GTR, NSX, Civic Type R, FRS/BRZ/GR86, BMW M2/M3/M4, A90/A91 Supra MK5, 350Z/370Z, 996/997/991 GT3, 981/718 Cayman/GT4, Tacoma/4Runner/GX/Land Cruiser/Tundra/Raptor, and more. You may have seen us on your favorite search engine on your quest for the perfect JDM wheel (if you're into that). It's about time we came to TMC to officially serve the Tesla community. We are authorized in-house stockists of the very products we work with, and work directly with the manufacturer and US distributor to provide availability and stellar service to both our retailer and wholesale clients. We offer fulfillment and will-call services and are headquarted in the San Francisco Bay Area, and serve all 50 states + international territories as well. Most importantly, we are Tesla enthusiasts ourselves and perform much of the R&D and product testing on our own vehicles in-house, while working directly with the manufacturer. Not only do we provide access to special-batch and limited-run sizes and colors (we are the ones that help make these batches possible via high-volume batch-orders and groupbuys), we are the source for hard-to-procure wheel sets in general and can tailor bespoke sets suited for your application based on our years of in-house experience across various platforms.
This thread has been created to share and discuss the technical detail of our latest offerings for the Tesla Model 3 + Model Y sector, specifically; the TE37 Ultra M-Spec in native Tesla fitment - 19x9.5 +28 5x114.3 in the highly coveted Face-4 concave, with factory M14 lug pockets, and dual hub for Model 3 Performance owners, as well as the TE37 Ultra M-Spec in 20x9.5 +22 / 20x10.5 +35 / 5x114.3 staggered fitments for those looking to run a beefier tire in the rear!
These are now available directly through us, or through our authorized partners and stockists/dealers.
This TE37 Ultra M-Spec has been engineered, catered, and procured specifically for the Model 3 / Model 3 Performance / Model Y! Face-4 concavity is a must, and this is a factory first for this platform. Previously, factory bolt-on fitments included the TE37 Ultra M-Spec in 19x9.5 +34, however; these only carry a Face-3 profile which is relatively flat compared to the +28 offset counterpart.
A little bit about the TE37 Ultra M-Spec:
The TE37ULTRA has inherited the TE37 6-spoke design with excellent stress dispersion and has enhanced the lineup of high performance cars. With lightweight in mind, this high performance high rigidity ULTRA is the strongest in the history of VOLK. The primary difference between the Ultra and Ultra M-Spec is the lack of the machining ring around the rim. The TE37 Ultra M-Spec has completely superseded the TE37 Ultra standard model, and the standard TE37 Ultra can no longer be ordered.
Technical details about the 19x9.5 +28 5x114.3 sizing:
Blast Bronze TE37 Ultra M-Spec, 19x9.5 +28 5x114.3, Face-4 Concave, System Motorsports Special Sizing
Magnesium Blue TE37 Ultra M-Spec, 19x9.5 +28 5x114.3, Face-4 Concave, System Motorsports Special Sizing
Matte Black/Flat Black TE37 Ultra M-Spec, 19x9.5 +28 5x114.3, Face-4 Concave, System Motorsports Special Sizing
Allow us to introduce ourselves one again - Many of you on TMC may recognize us from the involvement and role in the aftermarket automotive wheel sector for many other enthusiast platforms that you may have owned previously or currently own, such as the WRX/STI, EVO 8/9/X, R32/R33/R35 GTR, NSX, Civic Type R, FRS/BRZ/GR86, BMW M2/M3/M4, A90/A91 Supra MK5, 350Z/370Z, 996/997/991 GT3, 981/718 Cayman/GT4, Tacoma/4Runner/GX/Land Cruiser/Tundra/Raptor, and more. You may have seen us on your favorite search engine on your quest for the perfect JDM wheel (if you're into that). It's about time we came to TMC to officially serve the Tesla community. We are authorized in-house stockists of the very products we work with, and work directly with the manufacturer and US distributor to provide availability and stellar service to both our retailer and wholesale clients. We offer fulfillment and will-call services and are headquarted in the San Francisco Bay Area, and serve all 50 states + international territories as well. Most importantly, we are Tesla enthusiasts ourselves and perform much of the R&D and product testing on our own vehicles in-house, while working directly with the manufacturer. Not only do we provide access to special-batch and limited-run sizes and colors (we are the ones that help make these batches possible via high-volume batch-orders and groupbuys), we are the source for hard-to-procure wheel sets in general and can tailor bespoke sets suited for your application based on our years of in-house experience across various platforms.
This thread has been created to share and discuss the technical detail of our latest offerings for the Tesla Model 3 + Model Y sector, specifically; the TE37 Ultra M-Spec in native Tesla fitment - 19x9.5 +28 5x114.3 in the highly coveted Face-4 concave, with factory M14 lug pockets, and dual hub for Model 3 Performance owners, as well as the TE37 Ultra M-Spec in 20x9.5 +22 / 20x10.5 +35 / 5x114.3 staggered fitments for those looking to run a beefier tire in the rear!
These are now available directly through us, or through our authorized partners and stockists/dealers.
This TE37 Ultra M-Spec has been engineered, catered, and procured specifically for the Model 3 / Model 3 Performance / Model Y! Face-4 concavity is a must, and this is a factory first for this platform. Previously, factory bolt-on fitments included the TE37 Ultra M-Spec in 19x9.5 +34, however; these only carry a Face-3 profile which is relatively flat compared to the +28 offset counterpart.
A little bit about the TE37 Ultra M-Spec:
The TE37ULTRA has inherited the TE37 6-spoke design with excellent stress dispersion and has enhanced the lineup of high performance cars. With lightweight in mind, this high performance high rigidity ULTRA is the strongest in the history of VOLK. The primary difference between the Ultra and Ultra M-Spec is the lack of the machining ring around the rim. The TE37 Ultra M-Spec has completely superseded the TE37 Ultra standard model, and the standard TE37 Ultra can no longer be ordered.
Technical details about the 19x9.5 +28 5x114.3 sizing:
- Size: 19x9.5 / +28 / 5x114.3
- Colors: Bronze Almite (OG Bronze), Blast Bronze (A bit darker than Bronze Almite, Diamond Black, Diamond Dark Gunmetal, Matte Black, Gloss Black, Magnesium Blue, British Racing Green, Diamond Silver, Dash White, and more. We are able to order any color offered by Rays Engineering for you if it is not listed.
- Tesla Model 3 Fitment
- Method: Forged 1pc. Wheel (Reverse Rim)
- Face 4 Concave (System Motorsports Exclusive Batch Sizing). Available only through us and our authorized partners/stockists.
- RAYS original test: JWL+R Spec 2
- Dual 70.1/64.1 HB for Tesla Model 3 / Model 3 Performance.
- Factory M14 lug pockets bored out to accommodate M14 studs. No modification or boring out required. No sketchiness! True plug-and-play fitment.
- Compatible with factory Tesla TPMS system.
- Included: High Speed Air Control Valve (RAYS new logo)(BK)
- Recommended tire size: 265/35/19 or 255/35/19 depending on ride height/suspension setup/alignment. Please contact us for consultation.
- NOTE: System Motorsports is an official Direct Authorized Rays Engineering / Volk Racing / Gramlights dealer and distributor in the US. All Rays Engineering products we procure, source, and sell are manufactured and imported from Japan directly. Please do not purchase replica / imitation products - your safety is our concern!
- Even more photos on our gallery:
Official Gallery - TE37 Ultra MSpec 19x9.5 +28 5x114.3 for Tesla Model 3 / Model y — System Motorsports Blog) - Links to purchase/order:
- Rays Volk Racing TE37 Ultra M-Spec - 19x9.5 / +28 / 5x114.3 - (Tesla Model 3 Fitment) *SET OF 4*
- To view the full color chart gallery:
- Rays Comprehensive Color Chart Database + Gallery
- For those that would like 20" instead, we offer our #systemspec TE37 Ultra in 20x9.5 +22 / 20x10.5 +30 built specifically for the Model 3 + Model Y + Model 3 Performance + Model Y Performance. More details + ordering info can be found here:
- Official Gallery - TE37 Ultra MSpec 20x9.5 +22 / 20x10.5 +30 for Tesla Model 3 / Model Y - System Motorsports Blog)
- Vendor Official Rays Volk TE37 Ultra M-Spec Gallery - 20x9.5 +22 / 20x10.5 +20 for Tesla Model 3 + Model Y - System Motorsports Special Sizing
Blast Bronze TE37 Ultra M-Spec, 19x9.5 +28 5x114.3, Face-4 Concave, System Motorsports Special Sizing
Magnesium Blue TE37 Ultra M-Spec, 19x9.5 +28 5x114.3, Face-4 Concave, System Motorsports Special Sizing
Matte Black/Flat Black TE37 Ultra M-Spec, 19x9.5 +28 5x114.3, Face-4 Concave, System Motorsports Special Sizing
