I'm selling the Black Executive Rear Seats out of my March 2015 build Model S
Here it is loosely assembled on the floor...
The worst blemish to the whole thing, in my opinion is on the headrest of the right seat, depending on the lighting and angle looks like this...
I don't know what that is, it was like that when I got it and never cared about doing much to clean it up.
From other angles/lighting it isn't so noticeable...
This is the other side, note that the little ISO-fix indicator is missing on the bottom where you can see it on the other seat.
Another angle..
This is the center plastic separating the two seats although both seat backs are all actually one piece/assembly.
Another angle...
and another
another still
Here is the back of the seats
Here's the front of the seat bottom cushions plus the center console and it's plastic front cover. BTW nothing of the pieces are screwed together as it's sitting here.
Here are the front of the main connector between the seat's wiring harness to the car itself
Here's the metal frame.
I'm asking $2500 to pick up in St Pete, Fl or I'll ship at buyer's expense. If you want to see a different angle/pic or have a question, please let me know. It will come with the 6 screws that hold the center console to the rest of the frame but it doesn't come with the 8 bolts that hold the frame to the car. 6 of those bolts are M10-1.5. The other two are probably also that thread but I'm not sure of that because they were torx instead of hex heads. It's the same bolts and bolt holes for the other seat configs so it should be mostly plug and play.
For reference on how to install, please see the pages about 2nd row Executive here
Service Manual Repair Procedures
Here it is loosely assembled on the floor...
The worst blemish to the whole thing, in my opinion is on the headrest of the right seat, depending on the lighting and angle looks like this...
I don't know what that is, it was like that when I got it and never cared about doing much to clean it up.
From other angles/lighting it isn't so noticeable...
This is the other side, note that the little ISO-fix indicator is missing on the bottom where you can see it on the other seat.
Another angle..
This is the center plastic separating the two seats although both seat backs are all actually one piece/assembly.
Another angle...
and another
another still
Here is the back of the seats
Here's the front of the seat bottom cushions plus the center console and it's plastic front cover. BTW nothing of the pieces are screwed together as it's sitting here.
Here are the front of the main connector between the seat's wiring harness to the car itself
Here's the metal frame.
I'm asking $2500 to pick up in St Pete, Fl or I'll ship at buyer's expense. If you want to see a different angle/pic or have a question, please let me know. It will come with the 6 screws that hold the center console to the rest of the frame but it doesn't come with the 8 bolts that hold the frame to the car. 6 of those bolts are M10-1.5. The other two are probably also that thread but I'm not sure of that because they were torx instead of hex heads. It's the same bolts and bolt holes for the other seat configs so it should be mostly plug and play.
For reference on how to install, please see the pages about 2nd row Executive here
Service Manual Repair Procedures