Recent content by Janaman

Why not try the felt tape instead?

Hi, does anyone have experience with the following errors? Aero and louvers I understand, but 0014 coolant (is it topped up), compressor (AC or air?) and lowFlow is for water or AC? Suction and discharge are also ac related? The AC system works normally (in the cabin and when recharging).

Anyone tried putting front Model X wheels on the rear axle only? Leave the front 8x19 et40 with 245/45 tires and use 9x20 et35 with 255/40 tires on the rear. Aside from aesthetics, this will also have better handling characteristics (might hurt rear comfort and reduce slightly range - because of...

Apparently it does matter (open v. closed) as I took it apart once more, has set them open and assembled it all together. All are working well now. Prior to this - errors and no movement.

See attached MY soft-close over MS locking mechanism - clearly one can connect pulling line to the hatch lever where the spring normally sits… the issue is to redo the bracket for the motor and space both parts correctly to synchro entry point with pulling action… 2be continued :-)

How are you suppose to place them back in? Open or closed? Or it doesn’t matter as the actuator can turn in both direction during the initial test? Thx

It is more of an advaced Lego than working on a car... basic steps, taking things apart, sort what parts you need, get them online, make them fit, painted, done... lot of plastics (cooler tray, fins, louvers, tow cover), blade motors, bumper harness are on AliExpress too...

For those of us (with base interior lights) who are afraid of the futile efforts of one LED in the door to overcome the darkness... 3x smd led 10´´ strip on alu profile with transparent plastic cover, connected to oem wiring (under the rear lights under the carpet there are connectors, I used...

Has anyone attempted to retrofit/diy softclose to this lock/catch mechanism? You can get it on AliExpress for 2022 MS or 3/Y for under $100.

I have tried to replace the base front 16 cm speakers with Audison AP 6.5 2 Ohm/95 dB only to find out that it doesn’t work well. Low bass/volume (note - Audison and Hertz state sensitivity at 2,83V instead of regular dB/W/m which in the end turns in pretty much the same levels as other...