Wall Connector Physical Size?

[Grenex]

I am installing a Wall Connector for my recently purchased MS. I want to put a mounting block on the side of my house where the vinyl siding is, but I need to figure out what size block to get. I cant find physical dimensions of the WC itself. Can someone tell me HxW of the actual unit?

Thanks!

 

[aesculus]

There is a bracket it is installed on. From the installation manual it states:

Bracket Dimensions
Height: 15” (382 mm) Width: 6.22” (158.2 mm) Depth: 3.7” (96 mm)

 

[Grenex]

Thank you!!!

 

[ellett]

The new version 3 does not use a bracket. The wirebox is mounted directly on the wall.

Height: 9.8” (250 mm)
Width: 4.7” (120 mm)
Depth: 2.0” (50 mm)

Your best action is to get the manual for whichever version you're getting.

 

[ewoodrick]

I believe that the manual is online with the specifications. Look at where you order it.

 

[Grenex]

I believe that the manual is online with the specifications. Look at where you order it.

Yes, I checked the manual, but did not see physical size listed in there.

 

[David.85D]

There is a bracket it is installed on. From the installation manual it states:

note the wall connector is larger than the bracket. I did this, and extended the block higher than the top of the HPWC so the cable touched the block and didn’t rub the siding.

 

[ewoodrick]

Yes, I checked the manual, but did not see physical size listed in there.

Looking again, the mounting template is in the box.

But as per manual
Wall Connector Dimensions

• Height: 13.6” (345 mm)
• Width: 6.1” (155 mm)
• Depth: 4.3” (110 mm)

Wire Box Bracket Dimensions

• Height: 9.8” (250 mm)
• Width: 4.7” (120 mm)
• Depth: 2.0” (50 mm