I purchased this direct from Tech Forum and used for a short while. I ended up liking the screen in its default position so I'm selling this.
I did some trimming of the 3D printed shroud to make it fit a little better as can be seen in the photos. There was also small crack from shipping on the 3d print as you can see in the main photo of the where the print is mounted to the metal, but I put a little crazy glue and it's good as new. I also will include some washers that I used to make it more snug when mounting since i found it to be a little loose on the bolts. You can buy a brand new cover kit on the tech forum site for $48 if you are inclined to do so.
If you are not comfortable modifying your Tesla I suggest you do not buy this, sold as is.
Sells new for 395, here:
Replacement 3d parts if desired:
I did some trimming of the 3D printed shroud to make it fit a little better as can be seen in the photos. There was also small crack from shipping on the 3d print as you can see in the main photo of the where the print is mounted to the metal, but I put a little crazy glue and it's good as new. I also will include some washers that I used to make it more snug when mounting since i found it to be a little loose on the bolts. You can buy a brand new cover kit on the tech forum site for $48 if you are inclined to do so.
If you are not comfortable modifying your Tesla I suggest you do not buy this, sold as is.
Sells new for 395, here:
Atlas Plus Screen Mount!
Here it is! The culmination of 3 years of research and development. This is the 100% American made Atlas Plus screen mount kit for the Tesla Model 3 and Model Y! This screen mount features the patented left/right swiveling, and fore/aft pitch adjustment as our normal Atlas Mount. However, this...
tech-forum-products.myshopify.com
Replacement 3d parts if desired:
Atlas Mount Cover Kit
This is a plastic cover that replaces the soft fabric shroud used on the Atlas Mount. This cover comes with the Atlas Mount. If you are ordering the Atlas mount, there is no need to order this item. THIS IS NOT COMPATIBLE WITH THE STANDARD SWIVELING MOUNT. WE ARE WORKING ON A SEPARATE COVER FOR...
tech-forum-products.myshopify.com
