I just had MPP Comfort Adjustable Coilovers installed on my 2018 Tesla Model 3 Performance. I wonder if they actually made any adjustments so wanted to verify they configured to the recommended initial spec for my car. What are some simple things I can do on my own? It seems to me the car is sitting lower than expected and I noticed it bouncing going down the freeway a little when going 75 MPH. When going 60, I didn't notice any bouncing.
Here is a picture with it lowered. Note it is on 245/45R18 tires so the wheel diameter is slightly larger. The height from the ground to the jack point is now 3" front and back. I believe it was around 5" before and the recommended settings would only lower it about 0.5" roughly if I remember correctly. Does that sound like they maybe forgot an important step or selected the wrong settings from the page?
I figure I'll call MPP tomorrow (as well as probably the garage and ask them to make the adjustments and realign for me but want to know I'm not crazy here.
Here is a picture with it lowered. Note it is on 245/45R18 tires so the wheel diameter is slightly larger. The height from the ground to the jack point is now 3" front and back. I believe it was around 5" before and the recommended settings would only lower it about 0.5" roughly if I remember correctly. Does that sound like they maybe forgot an important step or selected the wrong settings from the page?
I figure I'll call MPP tomorrow (as well as probably the garage and ask them to make the adjustments and realign for me but want to know I'm not crazy here.