I noticed my dashcam stopped working and determined the USB port on my Jeda USB hub wasn't working anymore. I searched online and I saw someone posted their Jeda USB hub had burned out, and others asked if there had been other cases. After investigating further I found that one of the capacitors burned out and burned the circuitboard on mine as well. It got hot enough that it melted and deformed the plastic both from the inside and the outside of the case!
So now there is more than one that failed in this spectacular fashion. I wonder if these USB hubs might be dangerous? Anyway I thought I would post my experience in case anyone else might have concerns!
By the way the USB port on the Tesla that had the hub plugged into it also stopped working. However, after resetting the car (both thumb buttons in), and waiting a while the USB port on the car was working fine again. So at least the USB hub didn't take out the USB port on the tesla as well.
So now there is more than one that failed in this spectacular fashion. I wonder if these USB hubs might be dangerous? Anyway I thought I would post my experience in case anyone else might have concerns!
By the way the USB port on the Tesla that had the hub plugged into it also stopped working. However, after resetting the car (both thumb buttons in), and waiting a while the USB port on the car was working fine again. So at least the USB hub didn't take out the USB port on the tesla as well.