You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
I tried installing a homelink model from an Audi (vw part) just to see if it would work. After I installed it, the car showed the same as what you are seeing. So if your M3 is used, the previous owner may have tried to install a non M3/MY homelink module. And for those interested, the homelink module did not work (unsurprisingly)...it allows you to start a garage door profile but won't go past the 2nd step.Hello. I just got my new 3. And seems like HL is already installed dont know why.
I am having these error. Anyone know how to fix?
View attachment 962006
View attachment 962007
Installed the homelink module, configured it in the service menu, and everything is working perfectlyI'm trying to locate the homelink cable on an Austin (2023) Model Y - and it's not at the obvious location (as in the videos). Any idea where to look for it?
NVM - found it, hanging down near the headlight. Now just waiting for my eBay shipment to arrive tomorrow.
I removed the module and then went into service and ran the enable process and received same message. Looks like device isn't recognized or not responding and is defective. I ended up returning to eBay seller. May buy from Tesla like OP.I installed the homelink module per the thread on a 2023 Model 3P. Connector was in middle of frunk. After going into service mode to enable, I get a failure message on trying to enable the module. Any ideas? Is it possibly a bad module? I got it off of eBay with mount and bolt.View attachment 1017222
Another DiYer have the same error. Looks like we are not allowed to do DiY any longer.I removed the module and then went into service and ran the enable process and received same message. Looks like device isn't recognized or not responding and is defective. I ended up returning to eBay seller. May buy from Tesla like OP.
Another DiYer have the same error. Looks like we are not allowed to do DiY any longer.
I installed mine (From eBay) last month. It works fine. I remember that the module had Tesla name on the label which may be a factor.Thanks for that. It is the correct part number from this thread. This may explain the 'unauthorized configuration' in the error message. Bummer cannot DIY anymore.
I am on 2024.2.2.1.I also picked up a new Tesla OEM labeled Homelink unit from eBay. In Mid January I DIY installed, everything worked without issue. Still working OK as of now, I'm on 2023.44.30.8. Hopefully it won't break after the next FW update, if it does, I'll update again.