Search results

they had to order the harness? Thought they would have a ton in stock considereing they issued a recall

Well it stopped working again last night and the autopilot camera also stopped working. I was driving home last night, stuck in traffic, but the "driving visuals" showed nothing around me, its like I was driving on an empty street. Also the autopilot was not availiable (I have FSD), the auto...

nevermind, it started working now. I was about to go into service mode, see whether there were any error codes or anything, but put the car into reverse first, and it works.

Hey folks, my rear camera stopped working today. When I put the car in reverse, i only see the view from the 2 side cameras, nothing from the rear except the for the white "guide lines". I rebooted the car twice, didn't do anything. Anyone else have this issue? I haven't had any other problems...

I did buy a repair kit from amazon, but I waited too long. Lesson learned. I have Tesla mobile service coming out to replace it.

Hey Folks, I'm about to replace my windshield for the 3rd time in 5 years! Rock chip turned into yet another crack. Is the Tesla glass really weak or is this bad luck (I've had Tesla replace the last 2)? I drove a Lexus IS300 for 15 years (250K miles) and only need to replace the glass once...

I haven't read all the posts, so forgive me if I state something that has already been covered. I don't think this is due to any hair product. We used to have a pathfinder (full leather) and this would always happen to 1 seat in particular. Looked greasy. I would clean it, but then it would show...

I have the 19" and I had them powder coated in black. Paid $200 per wheel. It's been over a year, no issues.

Agree, seems cheap. Made the appt via the app, they sent a cost estimate and asked that I approve it. Says "request to check break fluid". I had them replace my cabin filter while they were here installing my HW3 computer, charged me $73 for it.

Just made an appt with Tesla. The sent me a quote for $19.50 to check the break fluid. I'll take it in.

There are a ton of tire threads already, sorry for adding another one, but I couldn't find what I was looking for. I have a 2018 RWD with 36K miles on it. I'm going to need new tires soon as I'm down to 4/32. I have stock 19s with the stock Continental ProContact. I haven't had any issues with...

so no need to book an appt for the 2 year? I had my AC filter replaced a few months ago and get me tires rotated a couple of times per year. Just check the break fluid myself?

how do these compare to the stock continentals?

I paid $800 for mine!

I ad to reprogram my garage door opener. The "profile" was still there, but i didn't do anything when i "pressed it" so I had to reprogram it

They just finished installing the FSD computer. Took just around 2 hours (did it on my driveway), as they also replaced the charging pins and air filters. I had to re-enter my wifi credentials, and link my phone's Bluetooth. Everything else (driver profiles, homelink, audio..) was fine. Told me...

What data/settings can I expect to lose one I'm upgraded?

I made an appt through the mobile app for the HW3 install on 5/20. Received a text 2 seconds later informing me that they had to cancel the appt due to lack of parts. I received a text on 5/28 saying that the parts were in and they wanted to schedule my install. They'll be coming to my house on...

i got 12.11.1 a couple of days ago. I have paid for FSD, but don't have HW 3.0 yet. I don't see traffic lights or any of that. Do I need HW 3.0 to see that? Also, for those of you that have had their HW swapped, how did you get it done? Tesla call you?

noticed the bracket was askew the other day. Pulled it off and noticed that one of the magnets came out. I stuck it back in, but a few days later it happened again. I glued it in, but then realized (way too late), that i put it backwards! so now I'm using the security screws.

One of the magnets fell out of my OttoStick holder.

Downloaded the updated today.

i'm still on 32.12.2, and I've paid for FSD if that makes a difference.

that's where i had mine done - satin black

had mine powder coated satin black. I wanted a different look from the thousands of other 3s I see daily.

I have my front plate on cause I'm worried that if I get pulled over, I'll get a fix it for the front tint. Can you put this on vinyl (like the carpool stickers), before putting it on the car? Will you still get pulled over by some uninformed officer? Need to know that first.

I was quoted $2k, so I did it myself. We in the bay have to pay.

i bought flyby 30 for the glass. Besides washing, what else do you do to prep the glass?

I'm in the East Bay, 20.2.1.

I bought some from RPM a while ago. They flickered all the time. Swapped them out for AO, no issues.

What are your thoughts on these? Do they really protect the rims against curb rash? Are these secure? I just had my stock 19s powder coated in satin black and I need to figure out a way to protect them against curb rash (for when the wife takes the car :))

well then...did not know that :) so do they sell a 3.0 non UK version?

My plan is to not let it sit at all. Wipe it off as soon as i'm done applying it (CQuartz UK 3.0). I bought FlyBy 30 for the glass

Pretty sure the UK 3.0 has anything to do with the United Kingdom. It's just a naming thing

I'm going to do my M3 within the next couple of weeks. How long did you leave the CQuartz on for? What did you use on the glass?

you're in Livermore, it doesn't snow there :) the OEM ones are fine for this climate

I'll have to check, but I think essence is free of oils and wax and is supposed to bond to the paint and CQuartz

Any reason eraser should go on after the polish and not before?

I'm in the process buying everything I need for this, let me know what you all think, not completely sure if the order is correct though. 2 bucket wash CarPro Iron X CarPro Tar X claybar with clay lube (Chemical guys) CarPro Eraser wash again? - to remove lube Polish with CarPro essence CQuartz...

I'm going to put my front plate on because of this. I bought a mount off of Etsy, it attaches to the air intake grill thing.

I currently have rpm ones in the trunk and the 4 puddles (all white), but im getting random flickers. Sometimes the trunk light flickers, sometimes its one of the puddles. Not sure what the issue is. Not enough current going to them, or crappy lights.

Does opticoat bond better to glass than cquartz?

What about all the glass roof? Cermaic coat on that as well? How do you remove the water marks (on the glass) prior to applying the coat? Vinegar/water?

which polisher/compound did you use?

So I'm probably going to go down the DYI route. Doing some research on which product to use. How is CQuartz? Or Pinnicale Black? Any other suggestions?

looks like I should get other I might do this instead.

What are the pros and cons of getting a ceramic coat? I'm undecided. I received a quote for $2k. How does it handle rocks chips? Do you have to re-apply it every once in a while? how does it handle scratches? If get in a fender bender, will insurance cover the cost of re-application?

I'm thinking of doing this. Does anyone know a good place in the bay to get this done?

I'm going to eventually get my stock 19s powder coated black (car is midnight sliver)

I have the 19s on my rwd, and the orginal continentals are wearing out fast. I have 10k miles and I probably have another 5k left on them. Whats a good replacement for those? The pilots?