Search results

So maybe it's just me, but 'Hold' mode feels and looks like it uses a lot more energy than 'Roll' in my P-. By feels I mean that I need to press the accelerator further in order to overcome the regenerative braking that "feels" like it's always on. And by looks I mean that for the same stretch...

I've had this problem intermittently with my front facing dash-cam, but it was usually only a single vertical 'line' of magenta pixels in my dash-cam footage. You're more likely to be able to re-create this artifact-ing around dusk/dawn since I think it has something to do with IR filtering...

I had to have my Front Aero Shield replaced after it began to tear away. I didn't hit any debris, road hazards, etc, it looked as if one of the front mounting screws worked loose and wind resistance did the rest. I taped it up to prevent further ripping, but that composite felt they use isn't...

So I've encountered this intermittent error and it's extremely frustrating. It might be noteworthy that i recently took a drive from Austin to Denver and out on the interstate highways and off in the middle of nowhere my bluetooth streaming was flawless. Once I got into a downtown area the 2-30...

Hi everyone. No y'all aren't crazy. This is definitely a software bug though as I had my turn signal module replaced due to normal turn signalling not working as expected. FrancoNY: I'd suggest you run through the turn signal stalk test (test left and right "half-press", "full-press", and...

This entire situation just makes me wish I had been either more or less impatient with my purchase. Originally I'd configured the AWD LR version, then Tesla came out with that beautiful white interior.. and being in Texas with our 100+ days of 100s I wanted it, and at the time it was only...

I wanted to ask what hub that was as well!

It is 3D printed and is an excellent solution for using the stock charging cradle/cables if you have your phone in a case.

LG V30+ owner If my V30 is in one of my front pants pockets it's an 85 -90% success rate. Back pocket 50%. Turning my butt to face the car while pulling a door handle brings it back to about 75%, but it's usually quicker to take my phone out of my pocket and try a handle

Aww dang it, there's a path left out where you could take the $5k refund on your M3P- (pre 9/15/18 order) and end up without PUP or FUSC... Eh, it's good enough. Unlike Tesla's communication on this issue It doesn't matter if they are or not? Tesla will helpfully remove both sources of FUSC-ing...

Okay, I think this covers everything... the "Super-Gifted", the "Screwed", the "semi-screwed", and everyone else, there's like 7 buckets that people could be in depending on the dates ordered on, picked up on, PUP+/-/included If the wifi antenna is in the passenger side mirror, maybe that's why...

Okay, so right now there are 3? groups of people: 1) Old PUP owners (paid 5k for PUP) - They have the choice of $5k refund or keep FUSC 2) Old P- owners - FUSC (some Telsa reps say refund/lose FUSC available, some say it isn't) 3) New P owners - They get PUP included, no FUSC So it seems like...

The installation of the new signal module took maybe 15 minutes, then he pulled 42.4 down (~20 minutes to install), and then I drove around for a few minutes to test out my blinkers while he logged everything. I finally swapped out my trunk lights with AO ones to keep my WiFi active, but no luck...

I also bought puddle lights from Abstract Ocean, the buzzing went away in mine after about a day. And I only noticed that the lights on either side dim when the corresponding front/back door is opened neither turns off for a while(I haven't tried opening all four doors at once yet though)

I literally had a ranger out today to swap out my turn signal, and the latest software he said he could pull down do my P3D- was 42.4 This was after 5PM CST, and there were already 42.8s on TeslaFi. So unless I missed the update release time by a silly small amount of time, the minuses won't be...

:( Just had a ranger out to replace my turn signal and only got updated to 42.4

There's a static dark blue line that is present in all my videos not quite halfway from the left. Does anyone else have vertical lines running thru their videos? Is this a problem with the camera?

I went with a full stealth XPEL + ceramic coat and I couldn't be happier. The car looks like it's freshly waxed every day, which with all the drizzle here in Austin has been lovely. Bird and bug residue wipes away easily with a microfiber towel and some water if it's dry. Not having worries...

Mach C - Speed relative to the speed of sound in a medium (Mach 2 = 2x speed of sound), so in this case speed of light times the speed of sound Also it reads as "moxie"

Okay, who's the pun-ster with this awesome vanity plate?

Yep, I nitinot that I hear/feel a little bit of rubbing on that side of the console as well

Her name is Baelee

I have my P3D- and don't regret it at all either. Then again I only ordered the P because I wanted the white interior (and the P was the only way to get the white interior at the time :) When that became available to other models I was a little miffed, but I also got free supercharging due to my...

Might be unrelated, but I have a question. Is this the same thing as when you have EAP on, are cruising at a set speed, and try to accelerate past what you have the speed limit set to, and it doesn't let you?

I didn't. I'll stop by tomorrow morning and do those things.

So is this a normal amount of drain for the car just being parked outside on a summer day? I took the first screenshot after dropping my ME off for wrapping, and didn't touch my app until I looked at it again in the 2nd photo... According to the math I'm losing a bit over 5mi/hr in charge just...

That makes me feel sad, since my delivery went fairly well. The detailing was a rush job and there were a couple of scratches on the front passenger hood/wheel well area and some in buffed in wax, but other than that my car seemed perfect

It seems like the times for the Texas Hold Up are coming to an end, and the rumored streamlining of the process wasn't just a rumor.. Or someone else had a 3 with my configuration but passed on it? My appointment time is 3:15, but I'll probably get there earlier just to see if it'll be ready...

Welp guys, it happened. I got a call this morning from Stephanie and my delivery date got changed... From the 24th to the 15th :p

I'm not sure if it was in this forum, or another, but I really do think that there is just a bin of VIN tags that the grab out of to stick on the cars, seeing as my assigned VIN is a LOT higher than any I've seen posted so far: JF0992XX Still not seeing it on the United Road site, but that also...

So due to all of y'all talking about delivery delays I got antsy and emailed Stephanie, and got a better response than I'd imagined. My P3D is in transport to the Pond Springs service center.. by truck.. AND!!! I should hear from someone next week about moving my delivery date up from the 24th...

I'm not sure if Powerwall is an option, I was just talking with a friend who does solar installs about adding some sort of battery bank to further lower energy costs/go off the grid when he told me all about the joys of AE, how they will charge you for the power that goes into your battery bank...

I'm pretty sure I'm going with Duane at XPEL. I already have my appointment scheduled so I can, hopefully, just drive off the lot and go drop off my car to be stealth PPF wrapped and tinted

One thing to keep in mind if you're with Austin Energy is that they still charge you for charging up your Powerwall/battery bank, whether it's sourced from the grid OR your solar array. So the only benefit you get from a Powerwall or battery bank is the option to have power if there's a grid...

Hey there everyone, can one of y'all from Austin check on my VIN? Getting a little antsy as my 9/24 date approaches.. Also if your ISA in Vegas is Stephanie A, you are in for an awesome experience! First e-mail from her was Aug 31st (Friday) I shopped around for loans and got my pre-approval...