Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Search results

  1. Domih

    I'm getting various BMS errors, and my model S won't go into Drive (D) or Reverse (R)

    I had exactly the same. I attempted the repair myself (ended up having GreenAid reattach the sensor wire), That succeeded but it still wouldn't work, bought ScanMyTesla app and cables and it appeared another one has come loose. There was too much water intrusion so every module needed to be...
  2. Domih

    Drive Unit Replacement

    Getting my DU replaced next week under warranty. Getting the "DI_w147_highTorqueWearLimit - Drive inverter Warning: torque mechanical wear limit reached" Probably the WOT-counter(wide-out throttle) that reached it's limit according to the SC man. Car has 255K KM. This would mean I have to...
  3. Domih

    TESLA MODEL S stopped working... CAR MAY NOT RESTART

    I don’t think that could be it, as the car was just standing still (for a couple of weeks)
  4. Domih

    TESLA MODEL S stopped working... CAR MAY NOT RESTART

    Hey, I just read through this forum and am wondering if my issue can be fixed without having battery replaced by Tesla. Car is 2014 Model S P85 Problem: - MCU died after trying to replace the display (had leakage) - Because MCU died, my 12V also died, as the car wouldn't go to sleep - Since...
  5. Domih

    Let the hacking begin... (Model S parts on the bench)

    @LuckyLuke from laadkabelwinkel.nl revived my MCU! The Tegra board was broken. A true hero with awesome service and great knowledge, thank you again! 🙌
  6. Domih

    Let the hacking begin... (Model S parts on the bench)

    I already called him, he's on holiday and will be back next week. He even lives in the same city!
  7. Domih

    Let the hacking begin... (Model S parts on the bench)

    It's the 64GB.
  8. Domih

    Let the hacking begin... (Model S parts on the bench)

    Thanks! I'm also in the EU (Netherlands). Will replacing eMMC fix it? Or do I have to replace the whole board? Maybe there is another way to fix it, if the eMMC went into panic/recovery mode or someting.
  9. Domih

    Let the hacking begin... (Model S parts on the bench)

    I own 2 model S with MCU1(P85 and P90D). 1 MCU(P85) stopped working after trying to swap the "leaking" display. Now I took the Tegra board of the P90D and installed it in the P85 MCU and it boots. I want to achieve 2 working MCUs ideally, but needed to figure out what's wrong first. Most...
  10. Domih

    Let the hacking begin... (Model S parts on the bench)

    The broken MCU boots with the "wrong" Tegra board installed!!!! Can I put it in the car? I can't enter service mode and unlock GW because I have to disable alarm, but I can't disable it. So my Tegra board/eMMC is broken. I'm kind of scared to put it in the car, because I also see the milage of...
  12. Domih

    Let the hacking begin... (Model S parts on the bench)

    I put Tegra board of the broken MCU in the working MCU and the working MCU won't boot. Will see if the broken MCU boots with the working Tegra Board. What I can see: The 12VOLCD doesn't turn on, 1v2 media doesnt turn on and the D124 (or D125) led is red (forgot to take picture). Will connect...
  13. Domih

    Let the hacking begin... (Model S parts on the bench)

    So put the Tegra board of the defective MCU in the working one and then check? Or put the Tegra board of the working one in the broken and check if it boots?
  14. Domih

    Let the hacking begin... (Model S parts on the bench)

    Ok so my other MCU fully boots on the testbench, I took pictures of both MCU lights, maybe in there we can see what's wrong and others may learn from it aswell. First pic is of the lights of broken MCU, second pic full board of broken MCU, third pic of working MCU and fouth pic is booted working MCU
  15. Domih

    Let the hacking begin... (Model S parts on the bench)

    What if I would place the Tegra board in my other MCU and install that one in the car? Or will I risk bricking both MCUs?
  16. Domih

    Let the hacking begin... (Model S parts on the bench)

    So the Ethernet lights turn on (see leds marked with "1". Orange stays on and green blinks very fast. Maybe the problem is with the red LED (marked "2")? It blinks and the text is "Q38"
  17. Domih

    Let the hacking begin... (Model S parts on the bench)

    I also tried to connect to my car with Toolbox3, but for that my car needs to be connected to the internet, I now get the "Seceth unlock failed" notification. Does any1 know of a way to connect to the car when car can't connect to internet for obvious reasons?
  18. Domih

    Let the hacking begin... (Model S parts on the bench)

    Thanks! Good to know they are interchangeable. They are both MCU1. There has been no redeploy, there also hasn't been an MCU swap. I will check the lights. The screen also doesn't light up when connected to car. Car displays "center display not available" and/or "park assist not available"...
  19. Domih

    Let the hacking begin... (Model S parts on the bench)

    They are not rooted. The display works fine on my other MCU. I think it broke because I connected the display of the (newer) other MCU to the old MCU. The display of the old MCU works fine on the new MCU. The wires are fine, I swapped them between both MCU's. When connecting to car or...
  20. Domih

    Let the hacking begin... (Model S parts on the bench)

    Tesla will just replace the whole MCU, right?
  21. Domih

    Let the hacking begin... (Model S parts on the bench)

    Hey! I just found out about this thread so I decided to create an account and participate! Hope any of you can point me in the right direction for my problem I own 2 Model S with MCU 1(2014 P85 and 2016 P90DL). I wanted to swap the display, because one of them had it come loose. After changing...
Top
Back
Blog
New
Forum list
Marketplace
Menu