Search results

I have a button to toggle foglights. My foglights flicker when I use it. Both the lights and the indicator on the screen. Is this why it's a beta feature? :D

I removed a lot of sticks, leaves, and bugs out of my radiator area before installing one, so things can definitely get in there. They can be found much cheaper on Amazon.

I received "System Update 3" on my Samsung Z Fold 4 today and was able to connect again.

Same situation here. I finally had to connect with a tablet. Hopefully a fix is incoming.

Yep, they were. I didn't notice them until after purchase, not that it would have changed my mind.

Agreed. Still shocking to hear. I had paint correction done with a ceramic coat. They couldn't do much for the spots, unfortunately. The body shop said they looked like "burns", or over-polishing. Odd that they're only on the hood. I guess that's the risk of buying a pre-owned car.

Something like this? https://smile.amazon.com/dp/B0B4FKLSS9/?coliid=I1S5HH6QRZPDPC&colid=1OBL5YBLPMUN9&ref_=lv_ov_lig_dp_it&th=1

I haven't done anything with it yet. I likely won't, TBH. The problem isn't that noticeable and I have better things to spend money on right now.

You mean this? https://www.rpmtesla.com/products/model-y-aluminum-tailgate-applique-glossy-black?variant=39998035165238

Have you checked with the surgeon or optometrist to see if they have any suggestions that might help? Otherwise, you might have to look for a different vehicle and eat the loss on the trade-in (if there is any). I'd certainly have her thoroughly test drive any possible replacement vehicles...

The out of stock ones are for the S and X, and the 6 button pack for the Y. You could get the 4 pack and add a couple of extra buttons and pay a little more. @dimitar.ns on this board is the founder and CEO of the manufacturer, Enhance, and is very helpful and responsive. Maybe he could even...

Oh, and the S3XY buttons come with a phone app that you can use as a speedometer. It might be easier to read than the touchscreen.

In the app, the manual is under "Service". You can also find it online at Model Y Owner's Manual | Tesla . I don't think there is a way to enlarge the fonts. The controls on the steering wheel can control the radio. You also might check into "S3XY Buttons" which are physical buttons that can...

I'm getting it as well. No FSD here.

FWIW, I would probably go with the EV Offer one. I may end up swapping out my Hansshow for it.

I did have an issue while hand-washing my car. It opened once while I was spraying and once when I was drying and ran my towel over that area. It is worrisome.

Oklahoma has an added charge on the annual registration and a tax on public chargers.

The Hanshow version isn't nearly as smart. It doesn't connect to the CANBUS at all. It basically looks for the sensor signal and simulates the trunk button being pushed.

It will. I use a power washer and hand wash my car and I've not had it open while doing so.

These prices are insane.

So the case is on back-order again. It would have been another 2 weeks or so before my Harumio order shipped. I cancelled the case and the adapter shipped today. It's frustrating because I told them when I ordered it a week ago to cancel the case if it would delay my order.

I hope! Thanks for the info.

FYI, I ordered the adapter and case from Harumio on 6/21 and it hasn't shipped yet. :(

They replaced the pressure sensors. Haven't had any more problems.

Just to verify, you did receive the case? Their website says pre-order and will ship 3rd week in June.

I just ordered from Harumio. It's absolutely ridiculous that this isn't available in the US. Discount code didn't work.

Dash, console, and buttons in black brushed metallic. The button area was the hardest. The buttons are a kit from Abstract Ocean. The center console is a kit from Amazon. For the dash, I had originally covered the white dash with a matte black PVC cover. I took it off and wrapped it with...

You can set the opening height! Open it to your desired height and then hold the close button on the liftgate for 3 seconds, until you hear a chime. From then on, it will open to that height.

There is a difference between the 2020 console tray and the 2021-2022 version with the refresh console. The one under the armrest is the same, but the one under the pop open cover are different, IIRC.

I have the same problem (car is pre-owned, came like this). I've tried everything I can think of, including clay bar and windshield repair kit with no luck. Let me know if you find anything short of replacement. The quote for replacement from Tesla was around $1500.

I wouldn't either. I just prefer the style and it might help with noise reduction. I've had the floppy style on previous cars and didn't care for it.

It wasn't me. I didn't have a problem with them.

I have that Amazon one. I really like it.

I'm currently getting a Climate Control Unavailable VCFRONT_a447 error code intermittently. I have an appointment at the service center Tuesday morning.

In my experience, the kick sensor is flakey and doesn't work a lot of the time. I'm seriously considering unhooking mine.

That's what I needed to hear. Thanks!

It's normal for them to stay on while driving. You can turn them off in settings under "Ambient Lighting".

Could it be done at a non-Tesla body shop? The next closest Tesla certified shop is 1.5 hours away. The car has MSM paint, which I really like. I'm just not sure how a black hood would look. The spots aren't super noticeable, but I know they're there so they bother me. I may need to suck it...

The spots? Yes. The shop said they were "burn marks" from polishing. They were there when I bought it used.

No damage, just some flaws in the paint and some small chips. They said they'd need to re-paint the hood and blend the fenders and front bumper. This was the authorized body shop here in town. Is this normal?

Nice effect! I use sentry a lot, so having the lights off only during sleep would leave them on a lot. The way I have them now, they'll turn off with the footwell lights even if the car is awake.

Update: I 3d printed a box to hold the excess wires. I also tapped off the footwell light to run an SSR (red wire in the pictures) so the Nestour lights turn on and off with the footwell lights instead of being on the entire time the car is awake.

Update: I 3d printed a box to hold the excess wires. I also tapped off the footwell light to run an SSR (red wire in the pictures) so the Nestour lights turn on and off with the footwell lights instead of being on the entire time the car is awake.

I posted this in the big Model 3 Light Kit Thread, but I think it turned out nice so I'll share it here, too. I just put the Amazon Nestour kit in my 2020 MYLR. Here are my thoughts. There were some reported issues with the tubes being curly and difficult to install, and with the included...

I just put the Amazon Nestour kit in my 2020 MYLR. Here are my thoughts. I had no problem with straightening the light tube. It came loosely looped in the box but unrolled easily and installed flat. Maybe they've changed it a bit? The double-sided tape included was 3M VHB. I used some...

Yeah, "Compatible with some Model Y Five Seat interior configurations". Just not mine apparently.

"Accessory is not compatible with any of your vehicles" 2020 MYLR 5 seater. I wonder what the difference is?

I have a 2020 MYLR and mine has the same unpainted area. I'm guessing it's normal.

I got these in yesterday for my 2020 MYLR. Nice, fast service. I ordered in the morning and they shipped that day. They are an exact fit and are very nice. They are not quite as bright as the photos make them out to be. Best of all, they won't be a pug hair magnet like the OEM carpet ones were.