Search results

No. This was a ready made wheel for another car with a differing bolt pattern, not a completely new wheel in which you can create a bolt pattern on it, im being helpful, youre being a useless smart***

Apparently 2 cars had FSD dispatched to their OTA about 2-3 months ago here in Aus, i think theyre testing. Its looking a little closer than people give it credit for

Everyone ive found are super overpriced and i just dont get why Tesla dont make one

Why dont they sell this in the Tesla Australian shop, only the Irish one?? I need a 1-phase adapter but they go for around $200 here and are aftermarket, id much prefer a Tesla branded plug if poss..

Tag me in pics once arrived plsss

2 days later service rx part from interstate, came to my work & repaired $646.50 (aud)

Ive just done the same thing when swapping my yoke from my old 3 to the new one... first time was simple, this time i made the mistake of not unplugging both cables beneath the airbag.. Will report back post-service centre visit booked for Tuesday next week

Just did the same when installing yoke, have installed twice prior without issue, anyway, will report back after Tuesdays in-house service (Australia)

I fixed the issue, the accessories cable into the light wasnt installed into the plug correctly.

Yes, i installed mine today & when i lock the car the left one stays on with the rear break lights while the RHS one turns off, did you fix the issue, if so, how? This is the one i purchased: https://a.aliexpress.com/_mtkNS62 I have installed these in my first 2021 SR+ and it went perfectly...

Looking for a set of Uberturbine rims w/tyres Ideally want to swap my wheels with the tyres for a set of Uber's otherwise will buy for the right price Please message me if you are interested

I just signed my application for registration they sent me, does this mean my car isnt far away? Its been ordered through my insurer so i dont have it attached to my app so cant see VIN or any delivery info... they quoted 6/9 - 23/9 rough date, any idea how exact that would be? @danleigh23 @Zinzilla

How did this go? Need to do the same to my new black 3..

Thanks mate, this worked for me :)

Still for sale?

This is the exact spec I’ve ordered and expecting delivery of next week, have you liked it? Is there anything you would have changed?

I’ll take them - pls PM

Oh damn, I like that idea! I’ll see if I can do the same - thanks man 🤘

My RWD was written off at the start of the year, I planned on doing the same as youve done however insurance would only replace with brand new identical car, wouldnt negotiate to buy me a second hand LR or P even if it were cheaper... I asked for the pay-out in cash but they said they would have...

Menu adjustable - basically need day time runnings lights on atleast. They’re powered through the break light wiring loom in boot

What you have is a post about model S foggies. I’ve installed model 3 (SR+ / RWD) where there 1. Wasn’t any (was only the plastic covers) 2. No wiring at all so installed a full harness which plugs into the rear break lights & work even in menu. If you need anything more private message me for...

Anyone know if the processor is upgradeable through Tesla similar to how early model S owners upgrade their MCU’s ?

Still avail?

I have Slipstreams but their painted white & 19” - on run flat tyres. Lmk if you’re interested

Any idea of cost of shipping to Sydney, Australia?

I’m convinced black is the best & easiest colour to make look good. Just dark tints/lowered/spoiler/diffuser & off u go!

Game changer, adds to the fun of driving a Tesla - like a video game. Takes about 3-4 hours of driving to get 100% used to. Reverse parking & long/big corners are harder Seller: https://a.aliexpress.com/_mqCWzHe

If u have a new SR+ chances are it’s an LFP, if so, u should be charging to 100%

Mine was the same as yours. I bought stock on covers from AliExpress for next to nothing, looks perfect now. Entire cabin went from black to white for <$500

Is that 20mm? I’ve seen 5mm on my mates and it looks a lot further out.. I’ve ordered the 5mm but now worried Can u post a pic of them from front on please? If they push out far enough I’ll get them from you if you will post int. to Sydney, Australia?

Hey mate, i realise this is 1 year old now so most probably had worked it out, for anyone else in the future...heres the answer - SR+ come with plastic covers in the front bar, no lights whatsoever let alone any available wiring loom/harness either. So.. Buy fog lights cheap on AliExpress -...

Done, 4.5 hours but finally worked it all out. Found a good video on YouTube to gain access through the firewall The 2 separated wires connect via the white cable which runs along inside the boot lid, they connect to the rear break lights. Hope all this helps someone else in the future.

There is no old harness mate. I’ve installed the lights now just making sure I have an idea of what’s needed beforehand & can’t work out why they gave me these extra plugs White is obviously for indicators which I don’t need and can by-pass but these extras.. wierd.. anyone?

I’ve installed the lights just need to do the wiring now

The first thing I tried a few weeks back. They don’t have any that’s why I’m looking for help here

I have recently installed fog lights to my 2021 Model 3 SR+ (non indicator ones) which I got from AliExpress and didn’t have the wiring as RWD model 3’s don’t have it stock. I’ve since obtained the wiring through Amazon There’s no install videos online and the threads here are quite extensive...

Can someone help (ELI5) - see the pic, I need to know where exactly all those plugs go, if it’s simply marked as to where I put them in good to go & as always, thanks in advance 🤓

You are a great man, thank you.

Ive just ordered some 10mm spacers as my widebody kit goes on over the weekend, anyone here can speak from experience tell me if im doing the right/wrong thing here>? Should i go bigger than 10mm etc Apprecaited in advance as always

mine is 100% from the drivers side door as when i slam the door closed it stops, if i simply close it softly it will squeak the entirety of that drive :( :(

Same issue in my 2021 SR+ (per above), frustrating!

Ill be honest as im not sure, ive recieved the wiring loom however the seller cant give me a tutorial video on connecting them up, ive posted asking if anyone had a video, fingers crossed i find one & when i do ill be sure to let you know how they work! :)

I recently installed the standard foggies in my SR+ and only then found out there was no wiring, ive since bought the wiring from Amazon & ready to connect it to the newly installed fog lights, the seller however didnt have an install video, anyone know where i can find how to wire up an SR+...

I’ve found the harness for sale on Amazon & instructions are super easy now I’ve done all the hardwork already. Thanks 🙏 Here’s the link for anyone else that may have the issue down the track - https://www.amazon.com.au/dp/B0993D45KR/ref=cbw_us_au_dp_ags?smid=A4XRJ8S0WXSO0

The wheel shop drilled them for me in less than 5mins. As I said fit like a glove 😇 Point is you can put model S rims on your model 3..

I’ve purchased and installed a set ($210AUD) but they didn’t come with wiring as they stated my car should already have it, it turns out SR+ 2021 doesn’t have the wiring loom stock. Any ideas where I can purchase the wiring from seperate? I’ve tried sellers on AliExpress but they all will only...

They were drilled, you wouldn’t notice. Fit like a glove

More pics

Original: * Steering wheel - 2 months of use, no marks or damage, airbag cover comes with but use your own - $550 * Side mirror covers - pearl white, no damage - $80 * Break peddal cover (rubber) - $35 * Frunk spring - $25 * Trunk badge (slight crack cant be seen when fitted, see pics for...

Ill buy the ingennext if its still avail?