Search results

well atleast its still covered (assuming ur purchase date), better now than later. Also its like having a new engine replaced, good comfort!

i saw a post on reddit with same codes. They had to replace a drive unit.

i recall a post somewhere on this forum that aftermarket like the ones you linked with the black foam melting or pull tabs breaking. I'll try to look for it later.

once u get it started u gotta start doing like a Push/pull. push it from the entry point until it kinda sticks and doesn't want to move anymore and pull it from the tip of the gasket until that starts to stop moving as well then repeat. It wasn't too bad, just gotta use some strength

tip from my experience, When installing either the left or right plastic trim, make sure the middle piece is semi attached to one of the sides as you do so. Otherwise the middle trim cant fit underneath the side trim after the fact because the side trim that you choose to install first will sit...

good to know

While I still think you are imaging things, confirmation bias. Find a really flat road to really test, let the car coast and see if it tries to go right. Under acceleration, it is normal for cars to turn one way or the other even in AWD. Google "torque steer". As for technical side in case you...

👀

I recall like a couple months back, 3rd party vendors were selling similar products. I was trying to find it to share with @atlchamp but they seem to have disappeared. found them...

Did u read the bandaid fix people are suggesting? Turning off the AC but keeping airflow for the last couple minutes of your drive. I think the real issue is moisture/water coming in from the right below the wiperblades where the intake is. Its just a big hole that water can get through. There...

interesting concept. I find window tint good enough for me though.

you need aphone case that reduces the camera hump. Or change your phone position upside down

I'd bet its due to the Chinese sourced LFP battery vs US sourced NCA in the Performance. I'd think the LR qualifies too if this is the case.

3,885 lb is the official spec for LFP SR 3,627 lb is the official spec for NCA SR. 10% more capacity for ~250 lb gain. Makes me appreciate the weight savings of the NCA alot even tho LFP gets a longer lifespan.

floor mats was deleted on all SR models years ago no? I highly recommend those aftermarket floor mats anyway

i dont have any problems here

https://smile.amazon.com/nextzett-92470515-Cockpit-Premium-16-9/dp/B0002Z2MZ4/r this acts as a cleaner with a shine free finish. if you need a stronger cleaner product: https://smile.amazon.com/3D-Leather-Vinyl-Plastic-Cleaner/dp/B0007RVLC2/

That doesn't sound normal. Have you tried spraying on matte interior detailer?

Its probably made in china and they used google translate. I think the sound difference with the additional speakers is worth doing. I'd do the hanshow kit it seems easier. My LR sounds a ton better than my friends SR.

i bought a spray can version. https://smile.amazon.com/gp/product/B000B6AF26/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 match was very good.

the USS sensors on my 2022 Model 3 cant detect the parking wheel stops since IIRC the manual states it cant see below 5 inches. Maybe Tesla vision with memory, can detect it. Regardless, luckily, the model 3 has slightly more clearance than the wheel stops. I'm not sure if they will delete USS...

2015+ mustangs use 150ft/lb. M14x1.5mm is what is on the mustang and i believe on the 3 as well. so 129 isnt all that crazy

.2 causes issue when changing fm radio station with the left knob. it changes itself to spotify instead of changing to my next favorite fm station.

i removed the old filters and used the odor eliminator in the same hole where the filters would have been. followed the instructions and put the new filters in. I dont think the vents is a good spot and the intake by the hood may be doable if you avoid the drainage hole. But I think using the...

https://www.amazon.com/TEMAI-Activated-Carbon-Filter-removal/dp/B08N69XWMP/ref=sr_1_5?crid=329UX5F6MLLQ2&keywords=model+3+air+filter&qid=1656296304&s=automotive&sprefix=model+3+air+filter%2Cautomotive%2C133&sr=1-5...

i bought 2 new carbon fibers on amazon and bought a $7 AC evap cleaner from autozone and the scent is gone for now. No need for the $20-30 evap cleaner options.

For everyone, does this smell go away after like 10-15 seconds of the AC turning on? Or is it persistent? I have something like this, (smells like glue to me) for the first 15 seconds and goes away. Sometimes its not even there.

Looks like atleast $10K in damages. Front bumper, wheel?, fender, doors, window, side mirror, A pillar scuffed, rear quarter panel + sideskirt.

I used this. https://www.amazon.com/dp/B097D3N4KV?psc=1&ref=ppx_yo2_dt_b_product_details It alsocomes with the metal adhesive mount but its only necessary if the surface isnt perfectly flat (the amazon description says the same). The back of the screen is very flat. ill upload a pic later. Ive...

the 12V port based on my knowledge and experience so far is: its powered until the car goes to sleep. If sentry mode or summon is on, its always on. Also, i dont know if the V1 has this feature but the unidens (gps models) offer a power save feature where if the gps detects speed at 0mph or no...

I have a uniden r7 in my other car and a r3 in the model 3. I used a phone mount to suction cup onto the back of the display.

My friend owns an id4 buggy interface with overlapping ui. The massage chairs are neat haha

this seemed to be a long time bug. I remember it is related to iPhone and bluetooth. I also noticed it when changing driving profiles. Careful for sure.

can someone post a pic of their current housing? Every pic online of the new vs old seems to same to me

i took delivery monday and didnt have a ryzen chip. :(

This happen before?

Todays was my supposed delivery day. It got pushed back an hour then 3 hours now the app tells me Tuesday. Jesus Christ tesla.

Can my tesla be picked up after hours? Fremont closes at 8PM but since its a no contact pick up is this possible? Or is the lot like blocked off during the night.

no unless u dont have full coverage on your other vehicle then it gets weird sometimes with certain dealers not willing to let it off lot. Uncertain with Tesla, but if you have full coverage youre good to go.

96kbps via Spotify app. Better off using bluetooth.

everyone taking deliv at fremont seems to have the longest wait. prob too many people in the area ordering cars and the lots are filled. Or lots are filled because no one is taking deliv til 1/1. Lol. Gonna reiterate, my OD was 10/24 and my one and only EDD is still 12/16-31. no movement...

Model 3 LR/Blue/Black/Aero/No FSD Fremont pickup OD: 10/24 1st EDD: 12/16-12/31 Fremont curse :eek:

since you said legal drag race, it probably means a prepped surface then by that, all the cars listed can tie or beat the Tesla. but as said before, their not going to be as consistent since all of those are RWD cars except the TT RS.

Lose on a roll without a doubt to any of them. C8 corvette should win in all conditions. Tie with the TTRS for 0-60 or you lose if your battery is at low charge. Beat the rest. Quarter mile: lose to all except if the dodge cant get a grip/bad driver. Your advantage is consistency.

Also can I not edit posts? 😅. New to forums sorry. I know people were getting lower rates by checking chase but I tried applying for a loan via chase.com and the automated message was to contact Tesla instead

Yeah I remember they did that like around oct 8. I thought the auto finance email was more permanent for questions regarding financing.

Does [email protected] still work as a contact to Tesla? I emailed them last Thursday and have to get a response because I wanted them to see if they can get a rate from chase.

Anyone tried to contact [email protected] recently? I sent an email last thursday to see if they could check the rates with Chase and I havent got a reply back.