Search results

Doesn't BC Forged MAKE the wheels for Signature?

Thanks for the reply. I did some more reading and decided to get 2 new tires for sure. Then I checked my front tires and they were at 4/32 so I figured might as well just get all 4 tires replaced. The Michelin PS4S' also have a 30k mile warranty so if it only lasts 15k miles, I'll get it...

Hey guys, Found a nail near the sidewall of my rear passenger tire. I have the Pirelli P-zeros on there right now and was hoping to get the Michelin PS4S after the Pirellis wore out. I have just under 15k miles on the car. In my previous AWD vehicles (Subaru STI), if you had to replace 1...

I've never ridden in a MPP Non-adjustables but I hear they're pretty comfortable. So you should be good on that front. Perhaps someone else who lives in someone else who lives near the coast or on salted winter roads can speak to the corrosion resistance of the non-adjustables. I have a set...

Check out their blog on their website. https://www.mountainpassperformance.com/remembrance-looking-forward-and-plaid/

Here's a quote from Jesse with MPP in response to one of my emails asking a similar question: " An alignment can be done a few days after installation, just try not to go on any road trips just in case the alignment is really far out. We don't want to kill your tires! It isn't a bad idea to let...

If you have a buddy who can help it would make things a lot easier. I got one of those Safejacks which works great. The only problem is that my hydraulic jack has those wide handles on the side. So when I lift up the car and position the safejacks, the legs of the safejack hit the handles of...

Very true. I'm never attempting that again. But small little stuff I'll try and tackle myself. The brake cylinder bracket and front lower control arm bushings have piqued my interest. Brake Bracket looks like a quick and easy job. Might need to find someone todo the bushings tho...maybe...

Good luck on the install. It took me 10 hours to install the coilovers myself. But I was having issues w/ my jack and the jackstand. By the end my thigh was spasming and cramping up!! LOL getting old sucks!!

Looking at the instructions - doesn't look like it's a DIY project if you don't have access to a press huh?

Hm thanks for that. I might just keep it at 12/10 then haha. Save me the trouble of readjusting it after the wife starts complaining while in the back seat.

I don't think sways are necessary at this point. Unless you plan on auto-x or tracking your Model 3 and feel like there is either too much sway or need to dial in more or less understeer/oversteer. The car handles pretty flat already and I'm on 12/10 settings which probably skews more towards...

I have some Aspira 15mm spacers that were on the car before with my Uberturbines. But they sadly do not fit the new wheels. Not sure if I want to go too low on the car. My wife drives it once in a blue moon and she's not equipped to drive a lowered car.

Lowered on MPP Comfort Coilovers. Set the perches to recommended height according to MPP. Which only dropped the car about 1/2". I might lower it another 1/2" but we'll see.

Thanks I just wanted to confirm. I JUST lowered the car and bought some 15mm spacers for the Ubers also. So wasn't counting on getting wheels any time soon but the deal crossed my path and I just couldn't pass it up. BTW - Love the user name and profile pic. I remember that scene from 5th...

Just bought some used Tsportline M3115's 20x8.5 et35 (square). Would I have an issue transferring over my Pirellis 235/35/20's from the Uberturbines onto the M3115s? I don't think it will be an issue but I just want to confirm. Thx

I installed the MPP Adj Comfort Coilovers this past Friday. The hub to fender measurement was about 393mm (my buddy who recently took delivery of his '21 M3P also measured 393mm). I set the perches on the coilovers to MPP recommended heights (74.4mm on the Fronts, 24mm on rears) and my final...

I had a 2017 Bolt as my last vehicle and can vouch for the Performance being a much stiffer ride. I ended up installing MPP Comfort Adjustable coilovers last Friday and am enjoying the ride significantly more. If you have any back issues I would recommend going with the LR and sticking...

When I was PPF'ing my rocker panels myself. I figured I'd try my hand at the A-pillars. Was turning out great but once I got to the top of the pillar, I started thinking about the seam that was close to eye-level. Didn't like that idea so I just ripped it off.

I got the full front clip (front bumper, hood, front fenders, headlights, fogs, and side view mirros) PPF'd shortly after I picked up the car. Then I just did some light correction and ceramic coated the car myself. At first I thought about doing the PPF myself. But I bought some PPF and...

Dang how are you guys getting such clean perfect cuts on that? Is it really obvious and easy to find the perfect place to make the hole so that it lines up with properly? Are you guys also leaving the dust cover off the rubber piece that sits atop the top hat? Thanks everyone your cars look...

Awesome!! The rear looks perfect. How low did you go on the car? How are you liking the MPP Comforts?

Can we get some pics from the 3/4 angle as well. Thx.

Thanks for the great answer. Just waiting now to buy the coilovers and for the family to go to Hawaii so I can install it on the downlow.

Thanks for all the great info. If toe is the biggest issue with regards to tire wear, would you recommend getting the rear toe arm? I'm only planning on lowering the car 3/4" - 1" so I'm hoping I won't need any other components besides the adj comfort coilovers. Thanks.

Did they give you an alignment report after it was done? If so post that up please.

Make sure your Speed Limit Mode isn't on. .

Congrats on your new Model Y! Does yours come with the updated center center console with the fixed wireless chargers? Thx.

Just noticed you're in Cali. Mind if I ask who is doing your install? You can feel free to PM me if you don't feel comfortable answering here. I'm not an installer but I am a picky customer. I've had several of my vehicles PPF'd and had the front clip of my Model 3 done after I picked her...

I'm sorry to tell you this...but that's a HORRIBLE PPF install. Those fingers on the lower rocker panel needs to be fixed BEFORE you start driving on it. Notice also on the rocker panel that ridge. They should have squeegee'd into that ridge to get rid of air bubbles. Same with the side...

Great build can't wait to see the finished product!!

Love the pictures! Did you get the car aligned after the install? Do you have any camber or toe issues that need to be corrected? I'm assuming no rubbing issues either? Thanks.

If you check out waiting room for Model 3 Performance in the Order stickied thread. there are a lot more there. I have some more pics but they're mostly of the misalignment areas that I took for the service center when I made my appt. lol If you have specific requests or angles I'll see what I...

Freshly installed PPF.

I specifically looked for any sign of a heating element. But there's no way to tell if there are heating coils inside the wheel. All you really see are a cpl of harnesses and brackes and such that hold the rolling switch balls in place and the steering wheel bracket.

Got it from my buddy who took it off his Model Y. I'm not exactly sure where he got it from. I noticed in the pic the proportions are slightly off. That's most likely from the wide angle shot. I'm still not sure how I feel about the finger indentations. The stock steering wheel is pretty...

Picked up my M3P yesterday afternoon and been having a blast. Fun Fact: in Driver settings make sure you keep Speed Limit Mode disabled. I took the wife to an empty commercial district to show off the speed and torque of the M3P. After the first launch she was like "that's it?"...did another...

Picking up tomorrow from Buena Park, CA. Ordered 10/24, VIN showed up 11/29. Got a text the next day and was able to schedule delivery. Can't wait!

Congrats! I got my VIN on 11/29 and was able to schedule delivery the next day. So expect a text tomorrow to schedule your delivery date. I could have picked up from Buena Park as early as Wednesday but I still need to return my Chevy Bolt tomorrow and won't have free time until Saturday...

Yeah the red looks really good! I'll be wrapping or plastidipping the front and rear emblem and I already bought the matte black DUAL MOTOR badge from AbstractOcean.

Buena Park.

YES! Got my VIN yesterday and a text today to schedule pickup this week. I'm busy so I can't get the car until Saturday!!! Can't wait for the weekend!! Car Ordered Oct 24th!

Just got my VIN!! White w/ Black Int. w/ no FSD. Ordered 10/24 Est Delivery - Nov 30th - Dec 3rd. Option to apply for Tesla Insurance is still greyed out tho. Also, where does it say where the car will be delivered to??? Thx.

Can you check for heated steering wheel please. The SR+ owners have checked (they don't have it) but I'm wondering if the top of the line model would have it. Thx.

I'm hitting F5 constantly waiting for updates and photos as well!! LOL

Ordered Oct 24th. White M3P - White w/ Black Int. Delivery window changed again from Nov 25 - Dec 5th Now it's back to it's original date of Dec 12th - Dec 31st.

Just checked my Tesla Account. The delivery date has changed again. I ordered M3P White with Black Int on Oct 24th. Southern California. Original Delivery date was Dec 12th - Dec 31st. Then it changed to Current date - Dec 5th. Now it's changed back to Dec 12th - Dec 31st again. Thanks for...

Same here guys. Ordered 10/24. Original Estimate was Dec 12th - 31st. New Estimated Delivery: November 21 - December 05

Thanks for the update. When did you place your order?

I was under the impression that the loan approval was good for 60 days. What happens if I submit an application in advance of 30 days before my delivery date? Your application would need to be resubmitted within the 30 day window. This would initiate a new credit inquiry, which could increase...