Search results

This thread is for the general discussion of the marketplace listing Like New! Wall Connector and Color Matched Plate. Please add to the discussion here.

This thread is for the general discussion of the marketplace listing Wall Connector + Color Matched Plate. Please add to the discussion here.

This thread is for the general discussion of the marketplace listing Hansshow 2021+ Model 3/Y Ambient Lighting Kit!. Please add to the discussion here.

This marketplace listing has expired and has been removed.

This thread is for the general discussion of the marketplace listing 2023 Tesla Model Y Performance FOR SALE!. Please add to the discussion here.

Hello All, In the process of installing Tein Flex Z Coilovers on my 2023 MYP. The fronts were super easy to install and adjust, but for some reason (99% operator error) I cannot get the rears figured out. I have had what TEIN calls the "HAS" dimension set in three separate measurements all...

Thanks! No they snap on over the top and adhere with 3M double sided tape.

OEM Carbon fiber spoiler for sale. Removed to install aftermarket spoiler. No defects or scratches. $250 Firm, buyer pays shipping. Thanks!

OEM Carbon fiber spoiler for sale. Removed to install aftermarket spoiler. No defects or scratches. $250 Firm, buyer pays shipping. Thanks!

All good, no issues thus far!

No issues on dragging, of course I take every incline/decline at an angle no matter how steep it might appear. lol

It is connected via two wires to the brake light harness. CMST should be able to give you more info on it, mine was one of the first kits and didn't have documentation in the kit on how to wire it. I didn't photograph the process and would hate to give you faulty information.

It is 3M adhesive

It wasn't too hard of a process... Just have to take your time. I wasted about an hour trying to see if there was a way to shortcut the process... only to realize there's not. I watched a TESBROS video for reference Remove Rear bumper

It took about 2.5 weeks from order to delivery. Very easy process

got mine from CMSTTuning, there are two versions. You lose the tow hitch ability and the entire rear bumper has to come off for install.

Installing the speaker and harness appears to be pretty easy, the firmware update is something that I would need the SC to do, unless it autodetects it on reboot.

Hey Everyone! Curious if anyone has successfully had their 2020 Model Y retrofitted with the PWS speaker? My MYP is a VIN 34XXX, I had read about a retrofit kit that is available by contacting your service department. After contacting them explaining my request, I received this as a response...

This kit is from CMST Tuning there is a version 1 and 2 options for all of the pieces except for the side skirts.

Which Voltex wing are you referring to...similar to the Unplugged performance one? or larger?

Yes, you lose the rear tow hitch and rear tow hook with this kit

For what it is worth, I have had the 12v Ohmmu in my MYP for about 6-7 months with zero issues. For any of the items I had to wire to the 12v system, I tapped into the 12v terminal that is under the back seat.

Yes it is the newly released CMST kit.

Fitment is nice, it goes over the stock side skirts with double sided tape and screws from the bottom. Downside is can’t run any mudflaps with them

Installed Carbon fiber body kit earlier this week!

Yes I did, the fit and Finish is great! Hardest part was the rear lower diffuser. Thought I could swap it without having to remove rear bumper, but you can’t. Entire rear bumper assembly has to come off.

The hood looks great! I’m still deciding if I want to get it or not. I think there’s two options for the rear spoiler, mine is V1 it’s definitely different than the stock performance one, took a little bit to get use to.

After having terrible customer service with Revozport for over a year, I stumbled upon a company called CMST tuning! https://cmsttuning.com/collections/tesla/products/cmst-tuning-carbon-fiber-full-body-kit-for-tesla-model-y They offer several different kits, you can buy individual pieces...

It’s still fairly popular in my area (Tennessee) but not nearly as much as it was 5 years ago. Mostly for car shows and downtown cruising now a days,

Pictures from this past weekend Cars and Coffee show

I’ve been waiting on mine from revozport since December 2020. Only half of it showed up. Starting to think it’s not coming lol

Posting this and a heads up to any Model Y owners considering a front carbon fiber splitter from Revozport. https://www.revozport.com/product-category/tesla/tesla-model-y/ Long story short… don’t. Buy a splitter somewhere else. I placed an order Dec of 2020 and it was shipped as a partial...

I blacked mine out second day of Ownership. Here’s a side by in progress picture. I’ve had it like this for about 10months zero issues. Is it wise? Probably not, but it looks 100%better.

Looks good!! What is the drop with those coil overs? I have UPP moderate springs and looking to switch to coils.

Appears to be "85B24LS"

Almost everything in search pertains to an MX or S, the battery in my car is a Hankook AtlasBX model, but can't find those on the internet.

Not sure, I have LED underglow and interior lights that I only run at night and have had for about 2 months. I can't see that draining it.

Hey everyone, I have a 2020 MYP and yesterday the 12v battery replace soon notification light came on. I requested a mobile service replacement but it is 2 weeks out. Are there aftermarket replacements I can buy and drop in myself? It looks pretty easy to change.

SOLD.

haha it’s two kits from OPT7. Their Auroa Pro. I had one for my model 3 I never used, forgot about it. Then ordered another one for the Y and just put both on lol

20” Forgestar CF10s Unplugged Performance Moderate Springs

As anyone painted the plastic trim pieces (wheel well trim, side skirts, rear lower bumper, lower front bumper) to match their Y? I’ve seen a few pictures online but no details on cost and process. Thanks!

The most "OEM-Like" one I have seen is this... Tesla Model 3 Instrument Panel Dashboard Display Provider | Autosonus It is definitely $$ but appears to provide a lot of useful data, also not sure how badly it affects the driver side air.

Any details on the bag kit they used? Looking to bag mine, but can't find a lot of info on it... just pictures.

Thanks! It is factory paint. i took it to have paint correction done and ceramic coating the first week of ownership

Bump $3200

Awesome! That is the same width and offset that I have