Recent content by xavl123

For what Tesla will charge you to fix that button you might as well just buy a new yoke or regular tesla steering wheel and install it yourself. plenty of videos online on how to do it.

Has anyone here experinced issues with their snapplate breaking off in a carwash? touchless and nontouchless? what about when its getting dried? Just concerned about the strength of a 3d printed holder. thinkinbg about getting one as I use a torklift brand holder and found out just recently that...

I've tried that but the 2016 MX I had doesn't have that feature that shows me all the USS so unfortunately i couldn't do that. I just had my gf put the car in D and hold brake while i went around all the sensors with my finger to feel a vibration. They were all vibrating. the holder i used was...

Moderator note: Merged from a separate thread. In short, if you have a front license plate and your tesla uses Ultra SOnic Sensors it can interfere with it and make the message come up. This is probably more so true if you're like me and didn't want to drill holes into the front bumper to use...

I would probably add one more thing, before you screw in the glass, I'd try to bring the doors to a close as close as you can and exit out another door to try and make sure it is aligned as best as possible from the top.

Further update: error came back. This bugged the crap out of me. But i figured it out. It was the front license plate. This is still odd though because it never interfered with anything before, and had been working fine since i got the car. I had one of those brackets that don't require you to...

Look you get what i mean alright. I'm not trying to be all politically correct here. You got the point. And clearly you are wrong about the shattering because I've removed and replaced a cracked roof glass on my X and it did not shatter so your source must not be all that great.

You know what I just figured it out. It was the front license plate. This is still odd though because it never interfered with anything before, and had been working fine since i got the car. I had one of those brackets that don't require you to drill into the bumper, and it stays about an inch...

I don't think you're getting it. That's the idea. The glass on one car is perfectly fine, lets say your car that you want to buy. They slip up a contract to you that says its as is etc. Then once you sign they swap out your perfectly fine glass with lets say another X that is maybe newer but has...

Parking Assist Unavailable, yet highway autopilot is working just fine. How is this possible? Doesn't highway autopilot use the sensors as well? How would it even be possible for this to work if the parking assist does not?

The roof glass used can be sold for 700-900 bucks. New 1200. It's really easy to take out. Other forums/threads on this. It ws probably the fog lights that used bulbs for older ones, idk. not here to be completely politically correct. point is the lights cost alot. Each ultrasonic sensor is...

I have a 75D. Here's some of my advice: 1) Ensure the air suspension is working properly. This out of pocket is about 400 to repair. You can test via the computer dashboard. 2) Have a third party inspector look at the car if you aren't mechanically inclined. Specifically you should have them...

Update: I took the car to a car wash. And my parking assist is working again.

Hoping someone here can help me. Getting parking assist unavailable error message. Either one of these three things are the cause of the issue: 1) May have been due to a car wash. i noticed my front license plate got bent a bit and it must have pulled on the plate somehow and pulled the bumper...

It was software locked. its 260 rated. plus you can find other articles on this on older model teslas. So, you can shove your smart ass remarks up your ass. https://www.notateslaapp.com/news/1562/tesla-confirms-software-locking-strategy-for-standard-range-model-s-and-model-x