JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser .
V
Yes the only thing that the DI reported was the cruise control toggle on/off. Everything else, it did not show a status for. I would...
Feb 29, 2024
V
I didn't get anything for BMS contactor voltage but the contactors do show open. I am getting DI_U014_NOT_OK_TO_START_DRIVE code which...
Feb 29, 2024
V
This time again I charged my 12v fully. After pressing the brakes the voltage drops to 12.1v. That should be sufficient.Fully charged my...
Feb 29, 2024
V
I am also getting 12v on F53. How about F76?
Also using CAN VIEWER here are some signals for the 12v battery and the DCDC.
First is...
Feb 27, 2024
V
I looked at the wiring diagram online, it looks like its actually on the inside of the car by the drivers side?
Does that seem...
Feb 27, 2024
V
I can't seem to find this connector. I checked everywhere on the LH Side rocker panel area. I took pictures of all the major...
Feb 27, 2024
V
Awesome, thanks for the diagram. I will check this tomorrow and report back!
Feb 26, 2024
V
Thanks for the input!
I checked the voltage between F29 and the battery ground and I can confirm there is 12.7V. So F29 is good. Also...
Feb 26, 2024
V
One thing I did note is that there wasn't continuity across from the two pins from F93, which is the resistor that should measure...
Feb 26, 2024
V
Measuring voltage across fuses won't give u 12v
U need to measure against ground
Only resistors will have voltage drop across them...
Feb 26, 2024
V
Also, when you mean bridge pyro manually did you mean to bypass this Fuse with direct contact?
Also if I'm not getting 12v from F93...
Feb 26, 2024
V
Sorry for the confusion, I got the fuse number mixed.
F93 (Contactor Power Cutoff (Pyrotechnic)) which is the 12v Pyro Fuse has...
Feb 26, 2024
V
I finally put everything back together since I took apart the DCDC converter. I checked the voltage across from F29 and surprise! There...
Feb 25, 2024
V
Sorry 3rd post... but before I forget. Why would my DCDC ECU not restart successfully and give errors via Toolbox? Does it rely on the...
Feb 24, 2024
V
Also, I read a post from another user that had identical codes as me. They changed the 12v Pyro fuse as well that was the difference and...
Feb 24, 2024