Recent content by Monkfamilynz

We have a gateway 1 with two powerwall 2’s. We get the following under Diagnostics:

I have a somewhat unusual PW setup in that I have two inverters (String) which are measured on two seperate CT clamps. It would be great to be able to see each of those strings and their respective outputs separately. Great app by the way.

Setting the export rate to zero and only having a peak price is the only way I have managed to get this to work. If you put figures in the other fields the PW will try to estimate how much energy it can sell and how much you will generate. The image below is what our settings are on to maximise...

Hi all I have a strange issue where the PW cuts off the grid connection and goes battery only when the Grid is working fine. This happens at periods of peak load when our system is set to charge from the grid and we are charging the cars (night time) The loads are often below 20kW range and it...

Yes two separate systems installed 9 years apart. We have a separate garage that the original system was installed on and the new system is on the house.

Our system is a split inverter system with 3.8kWh on system 1 and 4.5kWh on system 2. Installer configured both systems to be monitored on one input and it works fine. Our single pw2 can only charge at a max rate of 5kWh peak so some energy is not sent to the battery. That said there is plenty...