Recent content by Leafable

Is the kit capable to raise the car by 10mm higher?

@RedwoodMotors whats the different between the OEM springs and the Redwood springs? Any rate different?

Wow I have exactly the same issue as yours. They change the compressor low and high pressure sensors and recharge the gas still cant solve the issue. Now you lead us to the actual tiny cheap temperature sensor. Thank you!

Adjust the preload so you don't bottom out easily with softer springs. Thats what I did.

Possibly if you have the right tools. It will drop by 15-20mm

If you still on the original R&T springs then I suggest you swap them out to 8kg front and 9kg rear before you swapping out the whole kits again. I did that and the result is day and night.

How do you increase the front ride height? I spin the anti-clockwise and the grey tube increase and so do the preload. If I reduce the preload the grey will increase in length which will decrease the travel. What is the correct way to increase the front ride height? Whats the correct length of...

It's that the preload setting? I would prefer not to add more preload cause we don't want to make it harder for the rear

Weekend job. Now it's a lot softer and ride very smooth. Look at the rod size different and the higher the K the heavier the spring. Can we adjust the rear damper height? It's a bit too low now. In the manual it didn't say anything about height adjustment.

It's more than just 3 screws and a speaker. You need to tinkle with the MCU configuration. I already retrofit a few of 2019 and 2020 cars. All work flawlessly with Boombox and Megaphone activated on the GUI as well.

Sorry did you say 0mm preload? Wouldn't it bottom out all the time when hit slight higher bump? The manual recommend 25mm for M3 and 20mm for MY

Stock is 7k rear not sure about the front. 7k might be a bit too soft I think might be wobbly around like a boat.

Sorry guys, my "Rock Hard" might had been over exaggerated. Even though it stiff I still love the Ohlins kits without any regret. The handling improved 1000% compare to stock even at 20 clicks away from stiff. It's just give me a big grin on every drive. Where it can improve is some of the high...

Is it because you lower the chassis too far? Thats why its bottom out? Hows the ride now after a few weeks? My stock spring 11/12k still rock hard even on 20 clicks all round. Ordered 8/9k, still waiting for delivery

Are you planning to swap those springs for softer ride?