Recent content by jtxxx

yup it settled about 10mm within the first 500miles which was expected from reading the comments. Over the weekend I lowered the rear to max (about 20mm tire to fender gap) and the front to match. Have you measured your ground clearance? Mine is about 4.5 inch from floor to the jack points...

Thanks to Lasfit's giveaway I had the opportunity to try their center console side anti-kick pads. This product is something I've been thinking about getting due to the factory felt material traps so much dirt and its a hassle to keep clean. I'm a avid hiker that tend to end up in area with a...

$800 for suspension and arms is a crazy deal. definitely worth the drive to norcal if I didn't purchase and install a set two week ago...

that fitment makes me wish I got a M3 instead of MY. how much adjustment do you have left in the rear? The Tein on MY at the lowest rear setting will have about 10-15mm tire to fender gap (unless removing 1 or both collars😁) .

I did exactly the same adjustment and has been bind free for the past 3 days (fingers crossed). Mine was also the driver side like many have mentioned.

Do you have any preload suggestion? My left front is binding and can't seem to get a good preload setting to eliminate it. TIA

Attempted to adjust my model y driver side window this past sunday and there were no adjustment screws like the ones on Model 3. the window tracks were bolted directly onto the plastic frame that bolts onto the door. WTH tesla? lol.

I'll adjust to 36 and give it a try. LA roads are terrible so maybe thats the real culprit. Thanks for the info 😁.

same as factory.

How's the ride and tire wear at 35psi? i recently switched to 275/40/20 106Y as well and its super bumpy at 38-40 psi. TIA

These help cover my +25 offset wheels pretty nicely. Typical plastic material and fitment about 8/10. Very tiny gaps between the fender and flare that whistle on highway which probably can be close up with heat gun and pressure. Satisfied overall 👍

How's the ride with the Toyos? what psi do you inflate it to? love the blue/bronze combo 👍

Not specific to Tesla but seem to be a generic recommendation for their m14 lug nuts. I'll look into Gorilla lug nuts 👍 thanks!

Looking to get a set of Rays Dura lug nuts and curious about its torque specs. On the back of the box it states it should be torqued to 140Nm (103 lb-ft) which is lower than Tesla's recommendation of 129 lb-ft. Anyone torque their Rays lug nuts or other aftermarket lug nuts to 129 lb-ft? TIA.