Recent content by gigg

sold

19x9.5 ET32 255X40 Front 1.25 inch drop -1.5 camber Rear 1.0 drop -1.0 camber 8mm spacer

I have had a couple people ask about my mud flaps, so thought I would post it. I wanted mud flaps for the protection but with the hard plastic it was not an option on the front, and I did not care for the look of the Rally Armor. I used the Tesla mud flaps cut 2 inches off the hard plastic, cut...

On a Long range Is there a way to get a firmer pedal with stock MC and calipers? I have motul fliud, no air in the system, better front pads, and MPP MC Brace . The SS lines are so short, unless warn I cant see that helping much. I see how the rear piston retracts, is that where I'm getting all...

Mine would go away after being lifted for a short time as well, which is hard to understand, unless the tray would somehow get relief for short time from being in that position. I greased with a needle everything i could find and thought a fixed it for a couple of days. I spent so many hours...

In case anyone else has this issue. I have had a suspension squeak for the last year since new and replaced FUCA twice. Tesla installed one, then i installed an MPP. I finally found it. The front under tray was rubbing against the FLCA over bumps making similar sound as the FUCA squeak. Creaky...

FS. MPP LCA Bearings and press tool $350 shipped, US lower 48

For Sale. MPP LCA Bearings and press tool $350 shipped I have MPP coilovers and FUCA and camber arms There is only one alignment shop in my area that will do an alignment on a Tesla, and they wont adjust aftermarket parts. I thought i could adjust the camber myself . After 2 $120.00...

I have a 3 long range, with MPP suspension, MC brace, fluid changed, and pads. I would be interesting in anything else that would enhance the feel. Used for spirited canyon driving. I seems as though the rotational weight doesn't make any noticabe differance in performance. I do have forged...

Update: I think most of my concern was do to everyone that had posted, commenting there was no NVH associated with the bearing. So when i got significant added road noise i was concerned that repressing the bearing had compromised it. It was very helpful to hear some people have experienced...

bump

I did a Northern Tool press. Other than much preferring to do the work myself, its always a great excuse to buy new tools. I let the finance manager know how much money i saved doing it myself, and all the great honey-do things ill be able to do now. Perfect for pressing pant can lids on after...

I could also use some help. Im ordering wheels, wanting flush, but rather error sunk 1-2mm vs poke. Currently running 10mm front 18mm rear spacer on 245/40/19 DWS. Lowered approx 35mm, Camber -1.5 -1.8 19x9 ET 32,33,34? w/ 255x35 PS4S, and thought I use a 10mm spacer on the rear Also if i add...

Thanks. Thats what i am chasing, the best feeling car i can get in the twisties, Same thing i was chasing on my bike for 20 years. The bike is so weather dependent, dry and 60-90 f or its parked. Car in the wet has been fun to just work on lines, vision and smooth controls, in a temperature...