Recent content by EdEV

Check these guys out. Talk to Ernie. http://www.soundinnovations.com/

Looks great and I'm glad you're happy with it. And here's mine below. Also installed Ohlins and currently playing with damper settings and height.

2014 S85. Hitch install on the S is fairly straightforward, will require cutting a hole to the bottom of the bumper to make room for the receiver hitch, and you'll need to purchase a magnet mounted cover so the hole is not exposed when the rack is not used. Securing the bolt to lock in the...

1UP racks can be adjusted (closer or away) from the bumper as you prefer, then lock in place (tighten the rack on the receiver) using the bolt (part of the rack) with the associated key. This is to secure the bike rack from wobbling. The rack has a slotted hole so you can adjust the distance...

Installed Stealth EcoHitch on my wife's Model S and based on my experience clearance is an issue. Slight driveway angles causes the 1UP rack (with eBike) to rub. The Model S has air suspension which helps prevent (when raised) pavement rubbing but overall it will work but just be mindful when...

MYP with 20x9.5 on 255/45/20 square set up

Is there a consensus (from those with installed kit) if there is noise coming from the Ohlins DFV coilover - above noise level than the OEM? And can someone describe the "noise"? Is it a thud, grinding, creaking,...on compression, rebound, both? Thanks. Still waiting for my order to arrive but I...

If instead you install a rear lip MYP spoiler that entire area will be covered. Touch up the area first and then install the spoiler. I own a MYP and looked at the coverage area before replying to your message. it will be fully covered by the spoiler

Here's a good summary regarding wheel load ratings. And looking at TSportline's collection of 20" wheels the 3 I looked at are all rated at 900kg/1980 lbs per wheel. https://teslamotorsclub.com/tmc/threads/18-aero-wheels-and-model-y-load-limits.189813/

Please update us upon completion. And do you know if they use pre-cut PPF templates or PPF sheets and manually cut? Thanks

Have any updates to share, which shop did you go with and are you satisfied?

Here you go. Picture of the wheel before shipping to a customer, which happens to be the design I was going after (Volk Racing replica:)). The design spec included below.

Darn. I was there in Manhattan Beach this past weekend to visit my nephew. Manhattan Beach is a beautiful place, by the way. Thanks for the offer. By the way I’ve been working with a wheel fabricator in China, had them build me a Volk Racing replica😊, 20x9.5, +35mm offset, forged. My son has a...

Thanks for the detailed response. Until I actually ride these coilovers I'll never be sure which route to go (GT vs Sports) and after driving these past two days on my brother's Model X (air suspension - set to low) from the Los Angeles freeway 405 heading south to Long Beach freeway 405 I can...

Astute advice😉. I actually live in Fremont, say 4 miles from Redwood Motorsports, but in talking to them I did not get the impression that they had a demo MY to test, and I failed to ask that simple question.