Ladies and Gentlemen start your EL engines.
For some time now I have be working on a fast and safe way of getting the MS on jack stands.
To be able to make the “Stand & Bottle Jack Pad” to fit the MS jack pad on the MS perfect I purchased a MS jack pad.
what I can say that I will not recommend using any off the holes in the MS jack pad as you can see two screws is used to hold the MS jack pad to the car, the center hole
have some clearings to the aluminum frame on the car but if you pop that part you will end up hitting the aluminum frame behind it and I don’t think you want to do that.
I cut down the Torin jack stands sow they are short enough to get under the MS jack pad having the “Stand & Bottle jack Pad” in between this pad align the jack stand and the bottle jack
To get the car on jack stands
The “Stand & Bottle jack Pad” is CNC machined on both sides.
Yes I know you are not supposed to use 4 jack stands but the tires are just clear off ground and I have no plans to get under the car using 4 jack stands.
Are also working on some race ramps special designed for MS that have air suspension.
Alf :biggrin:
For some time now I have be working on a fast and safe way of getting the MS on jack stands.
To be able to make the “Stand & Bottle Jack Pad” to fit the MS jack pad on the MS perfect I purchased a MS jack pad.
what I can say that I will not recommend using any off the holes in the MS jack pad as you can see two screws is used to hold the MS jack pad to the car, the center hole
have some clearings to the aluminum frame on the car but if you pop that part you will end up hitting the aluminum frame behind it and I don’t think you want to do that.
I cut down the Torin jack stands sow they are short enough to get under the MS jack pad having the “Stand & Bottle jack Pad” in between this pad align the jack stand and the bottle jack
To get the car on jack stands
- Put the “Stand & Bottle jack Pad” on place
- Slide the short Torin jack stand under the “Stand & Bottle jack Pad”
- Slide the 2 Ton Bottle jack on top off the Torin jack stand foot under the “Stand & Bottle jack Pad”
- Jack it up
- Put the pin in the jack stand
- Next corner…
The “Stand & Bottle jack Pad” is CNC machined on both sides.
Yes I know you are not supposed to use 4 jack stands but the tires are just clear off ground and I have no plans to get under the car using 4 jack stands.
Are also working on some race ramps special designed for MS that have air suspension.
Alf :biggrin: