I have been contacted by several people looking for information on upper rear links to reduce MS camber. I can have my local shop do another run of links which will come out less than $600 per set machined and anodized (but without bushings). My only concern is making sure people that purchase these links take full and complete responsibility for the consequences of installing these links.
Please let me know if you are interested and include that you are comfortable with the following-
You take full responsibility for the design and installation of the links. I'll ship you nice aluminum coffee table conversation pieces and then you can decide if you want to put them on your car.
If you choose to install them on your car, you will need to press out the bushings from your existing links and into the new links.
You have looked at FMVSS 126 (especially the over steer emergency maneuver test) and know that, if you choose to modify your vehicle, you will likely reduce over steer margin in Model S.
Thanks
Bill
Please let me know if you are interested and include that you are comfortable with the following-
You take full responsibility for the design and installation of the links. I'll ship you nice aluminum coffee table conversation pieces and then you can decide if you want to put them on your car.
If you choose to install them on your car, you will need to press out the bushings from your existing links and into the new links.
You have looked at FMVSS 126 (especially the over steer emergency maneuver test) and know that, if you choose to modify your vehicle, you will likely reduce over steer margin in Model S.
Thanks
Bill